User's Manual

LS9 User Guide
Libre Wireless Technologies User Guide: LS9, Ver. 3.3.1 Page 24 of 93
Libre Confidential
4. Network Configuration
You can configure the network to LS9 module in the following ways.
• Wireless Network Setup Using WAC and SAC Method
• Wireless Network Setup Using Webserver Method
4.1.
Wireless Network Setup Using WAC and SAC
WAC / SAC Trigger Commands
To setup wireless network using WAC proceed as below
4.1.1 Wireless Network Setup Using WAC
To setup a wireless network using Wireless Accessory Configuration (WAC) proceed as
below:
Long press the Setup-Button on LS9 EVK to trigger SAC/WAC/LS-
Configure mode.
On an iOS device running iOS, go to Settings > Wi-Fi > SET UP NEW DEVICE
The WAC speaker is listed. For example, Libre <MacID>.