User's Manual

LS5B User Guide
Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page 60 of 78
Libre Confidential
7.19. Pair / Share credentials
Pair functionality enables LS-Enabled speaker in SA-Mode to pair (join) with other LS-
Enabled speaker.
Share functionality allows the LS-Enabled speaker to share its Wi-Fi credentials with other
LS-enabled speakers.
For Example: If there are two LS-Enabled speakers, called LS-Speaker A and LS-Speaker B,
then LS-Speaker A with pair enabled, can join LS-Speaker B only when LS-Speaker B is
enabled with share.
Pair / Share functionality is possible, only when both the LS-Enabled speakers
are in the same DDMS-Mode (Home-Network / Stand-Alone).
Example: Two LS-Enabled speakers in HN-Mode can use Pair / Share functionality.
For information on using PAIR / SHARE commands see “LibreWirelessTechNote -
LS_Light_Weight_Universal_Control_Interface” available in Libre Portal.
7.20. Multiple SSID
LibreSync allows LS-Enabled devices to store Eight different network’s information in Home
Network mode.
If the device lose network, it would scan for earlier connected networks and then connects
to the network with highest signal strength.
The details of each network’s SSID and Passphrase are stored in HN_SSID_x and
HN_PASSPHRASE_x respectively. The device starts storing the information from HN_SSID_7
till HN_SSID_0 and then erases the oldest i.e., HN_SSID_7 to write the new network details.
7.21. Zone Volume.