User's Manual

Table Of Contents

LS5B User Guide

Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page 58 of 78

Libre Confidential

End--

7.18. Switch between Wired and wireless modes

You can switch between wired and wireless mode using the Webserver

7.18.1. Switching to Wired Mode

To switch to wired mode from Wi-Fi mode proceed as below

Make Sure device is connected to an Wi-Fi Network

Step 1. Execute command #netcfg in the device terminal to know the device IP

For Example, 10.0.1.13

Step 2. Enter the IP in the address bar of your browser with port number

For Example, 10.0.1.13

Step 3. In Select Your Network drop-down list, select Switch to Wired mode

Figure 7.17.1-1: Switch to Wired Mode

Step 4. Connect the device with an Ethernet cable

Step 5. Click Save