User's Manual

LS5B User Guide
Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page 40 of 78
Libre Confidential
Step 3. Enter the following URL in the address bar of your browser 192.168.43.1
webpage shows Network status as shown in Figure 6-4.
Figure 6.2.2-1: Network Status in Webpage
Step 4. Select the Access Point (AP) to be connected to from Select Your Network
drop-down list
Step 5. Select Security Type from Security drop-down list, Enter the valid login
credentials and Click OK
Device disconnects from laptop and connects to the network selected
Step 6. To know the newly acquired IP execute command #netcfg in the device
terminal
End--
6.2.3. Manual Configuration Method
To connect the device to the network manually proceed as below.
Optional: Device can be connected to the network using the hidden SSID.
Step 1. In Select Your Network section, enable Configure Manually
Step 2. Enter the Access Point SSID and Click Save.
Device reboots and connects to the network.
Step 3. To know the newly acquired IP execute command #netcfg in the device
terminal