Manualshelf

User's Manual

ManualsBrandsLibre Wireless Technologies ManualsElectronicsWiFi Streaming Module with Voic
31323334353637383940
Table Of Contents
LS5B User Guide
Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page 35 of 78
Libre Confidential
Scenario 1
Precondition
LS-Enabled speaker is not connected to AP.
Action
WAC / SAC is triggered using the Setup Button (Press and Hold for
three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker enters WAC / SAC mode for Network
Configuration.
Scenario 2
Precondition
LS-Enabled speaker is connected to AP.
Action
WAC / SAC is triggered using the Setup Button (Press and Hold for
three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker enters WAC / SAC mode for Network
Configuration.
Scenario 3
Precondition
LS-Enabled speaker is not connected to AP.
Action
1. Reboot the Speaker.
2. Configure the speakers to DDMS SA-Mode (refer to DDMS
usability guide).
3. Trigger WAC / SAC using the Setup Button (Press and Hold
for three seconds) in LS EVK or through Message-Box 142.
Result
LS-Enabled Speaker switches from DDMS Mode to WAC / SAC
mode for Network Configuration.