User's Manual

Table Of Contents

LS5B User Guide

Libre Wireless Technologies User Guide: LS5B, Ver. 2.9 Page 15 of 78

Libre Confidential

Figure 3.2.1-5: Firmware Update Status

End--

3.1.2. SD-Card / USB Method

To update the binary file (Application-Image or Single-Image) on the LS5B module from SD-

Card / USB using the web server proceed as below

Steps

Step 1. Ensure the binary filename as “lsimage” and place the firmware image in

root directory of SD-Card / USB.

The Firmware image should not contain any extension.

Step 2. Insert the SD-Card / USB in the LS5B EVK

Step 3. Execute command #netcfg in the device terminal to know the device IP

For Example, 10.0.1.13

Step 4. Enter the IP in the address bar of your browser

For Example, 10.0.1.13

Step 5. In the Firmware upgrade section, Select Method as SD-Card / USB and Click

Upgrade