User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 34 of 89
Libre Confidential
ACP Sharing NV-Item is used to enable or disable ACP Sharing between LS-Module and
Host-MCU.
When ACP Sharing is disabled, there will be no reply on Message-Box #15 for the request
by Host-MCU on Message-Box #14.
Use the below syntax commands to enable ACP Sharing.
To enable ACP Sharing
#setenv AcpToLS <<1>>
To disable ACP Sharing (Default)
#setenv AcpToLS <<0>>
4.15. HOST BAUDRATE
HOST_BAUDRATE NV-Item is used to define different UART BAUDRATE. UART BAUDRATE
supported in LS5B is 9600, 19200, 38400, 57600 (default) and 115200
Use the below syntax to set the UART NAUDRATE.
To Set UART BAUDRATE
#setenv HOST_BAUDRATE 57600
4.16. DLNA Connection Close
DLNA_ConnClosed NV-Item is used to enable / disable the time gap between play-pause
trigger.
 Setting DLNA_ConnClosed to ‘0’ will trigger Play-Pause instantaneously.
 Setting DLNA_ConnClosed to ‘1’ will provide a time gap (negligible) between
Play-Pause trigger.
Setting DLNA_Conn_Closed NV-Item to ‘0’ will FAIL the DLNA