User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 29 of 89
Libre Confidential
4.2. Network Interface
Network Interface NV-item allows user to set the type of Network interface such as
Ethernet, Wi-Fi or Auto.
4.2.1. Ethernet
The syntax below provides the commands to enable Ethernet.
#setenv netif <<eth0>>
4.2.2. Wi-Fi
The syntax below provides the commands to enable Wi-Fi.
#setenv netif <<wlan0>>
4.2.3. Auto
The LS-Sync software detects the network interface automatically, based on the connection
available. Once the Auto detection is enabled Ethernet would get priority as network
interface on Boot-Up.
The syntax below provides the commands to enable auto detection of network interface.
#setenv netif <<auto>>
4.3. SSID of DDMS-Zone in SA-Mode
The default SSID for the DDMS-Zone in SA-Mode is “Direct-LBMyTestZone”. You can
change the SSID of the DDMS-Zone by editing the NV-Item “ddms_SSID”.
#setenv ddms_SSID <<NewName>>