User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 27 of 89
Libre Confidential
4. Configuring Non-Volatile-Item
 The latest LS-Images supports NV-Item from application
only and is accessible from Application Shell prompt. NV-item in
U-Boot is not supported anymore.
 To configure all the NV-Item values at one shot as per customer
choice, customers can use the envitem.xml file. This xml file is used
to generate a final Golden-Image for production.
Non-Volatile (NV) item in LibreSync is configured through command line.
 To configure the NV-Item, type the below command in the command line and
Reboot the LS-Module.
Syntax of the Command to set NV-Item
#setenv <NV_item_name> <value>
Syntax of the Command to Reboot
#reboot
 To know the value of the NV-Item set, type the below command in the command
line.
Syntax of the Command to Know the Value of NV-Item
#getenv <NV_item_name>
 To reset all the NV-Items to factory default values, type the below command in
the command line.
Syntax of the Command to Reset All NV-Items to Factory Default
#SetFacDefault