User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 20 of 89
Libre Confidential
Steps
Step 1. Ensure the binary filename as “lsimage” and place the firmware image in
root directory of / USB.
The Firmware image should not contain any extension.
Step 2. Insert the / USB in the LS5B EVK
Step 3. Execute command #netcfg in the device terminal to know the device IP
For Example, 10.0.1.13
Step 4. Enter the IP in the address bar of your browser
For Example, 10.0.1.13
Step 5. In the Firmware upgrade section, Select Method as / USB and Click Upgrade
Figure 3-4: Firmware Upgrade Method Selection
Step 6. LS5B-Module reboots to BSL, and Firmware Upgrade from / USB starts
automatically.
On successful upgrade, LS5B-Module reboots, with the updated application.
End - -