User's Manual

LS5B User Manual
Libre Wireless Technologies User Manual: LS5B, Ver. 1.0 Page 17 of 89
Libre Confidential
3.2. Application Update
The Application-Image used to update the firmware is a binary file. Application on LS
module can be updated in the following ways
 Network Method
 USB Method
 Internet Method
3.2.1. Network Method
To update the binary file (Application-Image or Single-Image) on the LS5B module over
network proceed as below
Make sure the LS5B EVK and your laptop / PC is connected to the
same network.
Steps
Step 1. Execute command #netcfg in the device terminal to know the device IP
For Example, 10.0.1.13