SDS
SAFETY DATA SHEET
The Libman Company LIBMAN READY TO USE 1 GALLON GLASS CLEANER #1064
The Libman Company Page 2 of 7
P312: Call a Poison Center or doctor if you feel unwell.
Precautionary Statement(s): Storage Statement(s):
P261: Avoid breathing dust/fume/gas/mist/vapours/spray
P264: Wash thoroughly after handling
P271: Use only outdoors or in a well-ventilated area
P403+P233: Store in well-ventilated place. Keep
container tightly closed.
P405: Store locked up
Disposal Statement(s):
P501: Dispose of contents/container in accordance with
local/regional/national/international regulations
2.3 HEALTH HAZARDS OR RISKS FROM EXPOSURE:
SYMPTOMS OF OVEREXPOSURE BY ROUTE OF EXPOSURE: The most significant routes of overexposure for
this product are by contact with skin, eyes, and respiratory system. The symptoms of overexposure are described in
the following paragraphs.
ACUTE:
INHALATION: May cause irritation to the respiratory tract. May cause headaches, drowsiness, and lassitude.
CONTACT WITH SKIN: May cause mild irritation.
EYE CONTACT: May cause eye irritation.
INGESTION: May cause irritation to the gastrointestinal tract, diarrhea, nausea, or vomiting.
CHRONIC: Long term exposure may cause damage to the liver, kidney, and heart.
TARGET ORGANS: Acute: Skin, Respiratory System, Eyes Chronic: Organs
SECTION 3. COMPOSITION AND INFORMATION ON INGREDIENTS
Hazardous Ingredients: WT% CAS# EINECS # Hazard Classification
Risk Phrases
Water 95 – 100% 7732-18-5 231-791-2 None None
Ethyl Alcohol 2 – 6% 64-17-5 200-578-6 [F] Highly Flammable
[Xi] Irritant
R11, R36,R37,R38, R67
Balance of other ingredients are non-hazardous or less than 1% in concentration (or 0.1% for carcinogens, reproductive
toxins, or respiratory sensitizers).
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2010 format. This product has been classified in
accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR, EU Directives and the Japanese Industrial
Standard JIS Z 7250: 2000
4. FIRST-AID MEASURES
4.1 DESCRIPTION OF FIRST AID MEASURES:
EYE CONTACT: If product enters the eyes, open eyes while under gentle running water for several minutes.
Remove contact lenses if present and easy to do. Continue rinseing for at least 15 minutes. Seek medical attention.
SKIN CONTACT: Wash skin thoroughly after handling. Seek medical attention if irritation develops and persists.
Remove contaminated clothing. Launder before re-use.
INHALATION: If breathing becomes difficult, remove victim to fresh air. If necessary, use artificial respiration to
support vital functions. Seek medical attention.
INGESTION: If product is swallowed, call physician or poison control center for most current information. If
professional advice is not available, do not induce vomiting. Never induce vomiting or give diluents (milk or water) to
someone who is unconscious, having convulsions, or who cannot swallow. Seek medical advice. Take a copy of the
label and/or SDS with the victim to the health professional.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Pre-existing skin or eye problems may be aggravated
by prolonged contact.
4.2 SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED:
Contact with the skin, eyes, and respiratory system may cause irritation. Prolonged exposure to fumes may cause
headaches, drowsiness, and lassitude.
4.3 RECOMMENDATIONS TO PHYSICIANS:
Treat symptoms and eliminate overexposure.







