Owner's Manual
Table Of Contents
- Quick Start Guide
- Installation and Operation Guide
- Product Overview
- Package Contents
- SKYPLAY-DFS-S Features and Connections
- SKYPLAY-DFS-R Features and Connections
- IR Remote
- Installation Instructions
- Frequently Asked Questions
- Troubleshooting
- SKYPLAY-DFS Technical Specifications
- SKYPLAY-DFS-EU Technical Specifications
- Spec Sheet
7
RX / RECEIVER
Power
Register
Link
Video
SKYPLAY-DFS-R
5vDC
1.5A Max
HDMI Out
Power
Top
Rear
Front
Power Button–Press power on and o
receiver.
Register Button–Pressed during initial
conguration to pair with receiver.
Link LED–Indicates network status. LED
will be solid during normal operation.
Video LED–Indicates the video stream is
present.
Power Input–5V DC power input for
supplied power supply.
HDMI Out–HDMI output port to connect
to display.
IR Receiver–Receives IR signal for source
device and sends it to source through
transmitter.
Please review the location of all ports before proceeding with installation.
1. Place the SKYPLAY-DFS-R in a location where the IR Receiver is not blocked by
any obstructions.
2. Connect an HDMI cable between the HDMI Out port on the SKYPLAY-DFS-R
and the HDMI Input port on the display.
3. Plug the power supply into a wall outlet. Do not apply power to the SKYPLAY-DFS
receiver at this time.
In addition to resting on a at surface, the SKYPLAY-DFS-R can be mounted on a
wall or furniture. Please see page 5 for mounting guidelines.
SKYPLAY-DFS-R Setup