Owner's Manual
Table Of Contents
- Quick Start Guide
- Installation and Operation Guide
- Product Overview
- Package Contents
- SKYPLAY-DFS-S Features and Connections
- SKYPLAY-DFS-R Features and Connections
- IR Remote
- Installation Instructions
- Frequently Asked Questions
- Troubleshooting
- SKYPLAY-DFS Technical Specifications
- SKYPLAY-DFS-EU Technical Specifications
- Spec Sheet
SKYPLAY-DFS Installaon Guide
23
This module complies with FCC regulaons. Any changes or modicaons not expressly approved by the responsible
party could void the user’s authority to operate this equipment.
Noce:
• This module in its nal integraon requires the end-product to connue to comply with DFS requirements. A
class II permissive change may be required for operaon not already described in the FCC Grant ling.
• The OEM of nal integrator must ensure that FCC labeling requirements are met for a host using this module, if
(1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users
do not have straighorward commonly used methods for access to remove the module so that the FCC ID of
the module is visible; then an addional permanent label referring to the enclosed module should be used,
with the following contents: Contains TX FCC ID: VSQAMNKHIN1. RX FCC ID: YG7ZRF32200
• The host OEM user manual must also contain clear instrucons on how end users can nd and/or access the
module and the FCC ID. The applicable usage is to be used as a wireless device, connected to the back of a
professional camera and transming live video, coming from BNC connectors.
• Only the supplied approved antenna should be used.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon.
FCC and IC Radiaon Exposure Statement
This equipment complies with FCC RF radiaon exposure limits set forth for an uncontrolled environment.
This transmier must not be co-located or operang in conjuncon with any other antenna or transmier.
This equipment complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operaon.
The antenna used for transmission must be installed to provide a separaon distance of at least 20cm from all
persons and must not be co-located or operang in conjuncon with any other antenna or transmier.
FCC Warning