Owner's Manual
Table Of Contents
- Quick Start Guide
- Installation and Operation Guide
- Product Overview
- Package Contents
- SKYPLAY-DFS-S Features and Connections
- SKYPLAY-DFS-R Features and Connections
- IR Remote
- Installation Instructions
- Frequently Asked Questions
- Troubleshooting
- SKYPLAY-DFS Technical Specifications
- SKYPLAY-DFS-EU Technical Specifications
- Spec Sheet
SKYPLAY-DFS Installaon Guide
17
Select Disconnect Wireless Link from the Setup menu to turn o the
wireless radios in the SKYPLAY-DFS-R.
Press the Source buon on the remote to turn the radios back on.
Setup
Add new Video Source
Remove Video Source
Modify Video Source Name
Disconnect Wireless Link
The SKYPLAY-DFS-R Disconnect Wireless Link option is available to remove the link between the current receiver and the
transmitter to allow another receiver to accept the video stream.
Link LED
Video LED
Power LED
Disconnect Wireless Link
LED States
BLINKING MODE DESCRIPTION
Solid Connection is established
Link quality is good
Slow (every 3 sec) Device is in listen mode
Link quality is reasonably good
Normal (every 1 sec) During link setup mode/during registration
Fast (every 0.1 sec) System Error (Video LED ashing as well)
Link quality is poor
BLINKING MODE DESCRIPTION
Solid Video signal is locked
Fast (every 0.1 sec) System Error (Link LED ashing as well)
BLINKING MODE DESCRIPTION
Solid (blue) Receive unit is active
Solid (red) Standby mode