Owner's Manual

SKYPLAY-DFS Installaon Guide
11
Point-to-Point Pairing
Without remote
1. Apply power to the display.
2. Plug the power supply with USB connector into the Power Input port on the SKYPLAY-DFS-R.
3. Plug the power supply into the Power Input port on the SKYPLAY-DFS-S.
4. Apply power to the source device.
5. Press and hold the Register button on the SKYPLAY-DFS-R until the following message appears on the display:
Please Activate Registration on Transmitter Unit
6. Press and hold the Register button on the SKYPLAY-DFS-S until the following message appears on the display:
Adding transmitter name. Press OK to continue or Exit to cancel
7. Press the Register button on the SKYPLAY-DFS-R to conrm.
8. The following message with a progress bar will appear on the display while the devices are paired:
Adding transmitter name...
9. When pairing is complete, the message and progress bar will be removed from the display. The Link and Video LEDs
on SKYPLAY-DFS-R the will be lit. Video from the source device will pass to the display.
The SKYPLAY-DFS transmitter and receiver must be paired together to pass video.