Owner's Manual

SKYPLAY-DFS Installaon Guide
10
Wall Mount the Receiver
Connect Source and Control to Transmier
A scale template is included in the Quick Start Guide that accompanies the product. Leer and A4 sized templates
are available on the Intelix website (www.intelix.com).
In addion to resng on a at surface, the SKYPLAY-DFS-R can be mounted on a wall or furniture.
Please review the location of all ports before proceeding with installation.
1. Connect an HDMI cable between the HDMI port on the source device to be extended and the HDMI Input port on
the SKYPLAY-DFS-S.
2. Plug the IR emitter into the IR Out port on the SKYPLAY-DFS-S.
3. Remove the adhesive on the IR emitter. Attach the emitter to the IR window on the source device.
4. Plug the power supply into a wall outlet. Do not apply power to the SKYPLAY-DFS transmitter at this time.
The mounng holes on the SKYPLAY-DFS-R are horizontally oriented
with 475 mm (1.87 in) separaon.
Use #8 pan head screws that are long enough to secure the
transmier to the wall while also providing a 8 mm (0.31 in) space
to reach the mounng holes.
475 mm
(1.87 in)
8 mm
(0.31 in)
Connect Display to Receiver
Please review the location of all ports before proceeding with installation.
1. Place the SKYPLAY-DFS-R in a location where the IR Receiver is not blocked by any obstructions.
2. Connect an HDMI cable between the HDMI Out port on the SKYPLAY-DFS-R and the HDMI Input port on the display.
3. Plug the power supply into a wall outlet. Do not apply power to the SKYPLAY-DFS receiver at this time.
In addition to resting on a at surface, the SKYPLAY-DFS-R can be mounted on a wall or furniture.