Owner's Manual

SKYPLAY-DFS Installaon Guide
9
Installaon Instrucons
Quick Start
1. Wall mount the transmier (oponal)
2. Wall mount the receiver (oponal)
3. Connect source and control to transmier
4. Connect display to receiver
5. Point-to-point pairing
6. Point-to-many pairing (signal distribuon)
7. Many-to-point pairing (signal switching)
Wall Mount the Transmier
In addion to resng on a at surface, the SKYPLAY-DFS-S can be mounted on a wall or furniture.
A scale template is included in the Quick Start Guide that accompanies the product. Leer and A4 sized templates
are available on the Intelix website (www.intelix.com).
The mounng holes on the SKYPLAY-DFS-S are vercally oriented
with 620 mm (2.44 in) separaon.
Use #10 pan head screws that are long enough to secure the
transmier to the wall while also providing a 6 mm (0.24 in) space
to reach the mounng holes.
62 mm
(2.44 in)
6 mm
(0.24 in)