Spec Sheet

• Across-the-line magnetic contactor

• Test/Auto switch

• Terminal block for easy wiring

• Circuit breaker

• Green pump run indicator light (internal)

• Red alarm indicator light/audible alarm

• Auxiliary contacts

• Alarm silence and test switches

• Tri 120/208/240V operation on 1-phase

• Tri 208/240/480V operation on 3-phase

• Alarm bell

• Redundant o

• Cycle counter

• Dead front

• Main disconnect

• Flasher

• Manual alarm reset

• Power ON light

For reliable control of a

single pump in residential

or commercial installations.

Common applications include

sump basins, efﬂuent or sewage

pump chambers and lift stations.

Features

Other Available Options

SX-SERIES

Simplex Pump Controls

NEMA 1 NEMA 4X

• Lockable latch

• Overload protection

• Alternate beacon color

• High and low level indicators

• Seal fail indicator

• Anti-condensation heater

• Pilot breaker

• Thru-door overload reset

• Beacon guard

• Thermal cutout

• Elapsed time meter

• Delay timer

• Lightning arrestor

• GFCI convenience receptacle

• Start/run capacitors

PAGE 1
SX-SERIES Simplex Pump Controls For reliable control of a single pump in residential or commercial installations. Common applications include sump basins, effluent or sewage pump chambers and lift stations.
PAGE 2
SX-Series Simplex Pump Controls Standard Features Enclosure: 8" x 8" x 4"; NEMA 4X – ultraviolet stabilized thermoplastic for outdoor use; NEMA 1 – metal for indoor use. Certain options may increase enclosure size. 3-phase panels measure 12" x 10" x 6". Magnetic Motor Contactor: Controls pump by switching hot electrical lines. HOA Switch: Offers manual operation of pump (on circuit board).