User Manual

©Copyright 2009 Liberty Pumps Inc. All rights reserved 3
MODEL SPECIFICATIONS
Model HP Volts Phase
Full Load
Amps
Solids
Handling
FNPT
Discharge
Automatic or
Manual*
Shut-off
Head
LE41A 4/10 115 1
12
2” 2” Automatic 19’
*LE41M 4/10 115 1
12
2” 2”
Manual*
19’
LE51A 1/2 115 1 12 2” 2” Automatic 25’
*LE51M 1/2 115 1 12 2” 2” Manual* 25’
LE52A 1/2 208-230 1 6.8 2” 2” Automatic 25’
*LE52M 1/2 208-230 1 6.8 2” 2” Manual* 25’
LE71A 3/4 115 1 12 2” 2” or 3” Automatic 28’
*LE71M 3/4 115 1 12 2” 2” or 3” Manual* 28’
LE72A 3/4 208-230 1 6 2” 2” or 3” Automatic 28’
*LE72M 3/4 208-230 1 6 2” 2” or 3” Manual* 28’
*LE73M 3/4 208-230 3 4.1 2” 2” or 3” Manual* 28’
*LE74M 3/4 440-480 3 2.1 2” 2” or 3” Manual* 28’
LE102A 1 208-230 1 7 2” 2” or 3” Automatic 36’
*LE102M 1 208-230 1 7 2” 2” or 3” Manual* 36’
*LE103M 1 208-230 3 5.3 2” 2” or 3” Manual* 36’
*LE104M 1 440-480 3 2.5 2” 2” or 3” Manual* 36’
*LE105M 1 575 3 1.9 2” 2” or 3” Manual* 36’
NOTE: LEH100-Series High-Head pumps require a minimum application of 15’ head.
LEH102A 1 208-230 1 12 2” 2” or 3” Automatic 53’
*LEH102M 1 208-230 1 12 2” 2” or 3” Manual* 53’
*LEH103M 1 208-230 3 9 2” 2” or 3” Manual* 53’
*LEH104M 1 440-480 3 4.5 2” 2” or 3” Manual* 53’
*LEH105M 1 575 3 3.3 2” 2” or 3” Manual* 53’
NOTE: LEH150 & LEH200 Series High-Head pumps require a minimum application of 20’ head.
LEH152A 1.5 208-230 1 15 2” 2” or 3” Automatic 70’
*LEH152M 1.5 208-230 1 15 2” 2” or 3” Manual* 70’
*LEH153M 1.5 208-230 3 10.6 2” 2” or 3” Manual* 70’
*LEH154M 1.5 440-480 3 5.3 2” 2” or 3” Manual* 70’
*LEH155M 1.5 575 3 4.9 2” 2” or 3” Manual* 70’
*LEH202M 2 230 1 18 2” 2” or 3” Manual* 83’
*LEH203M 2 208-230 3 13.2 2” 2” or 3” Manual* 83’
*LEH204M 2 440-480 3 6.6 2” 2” or 3” Manual* 83’
*LEH205M 2 575 3 5.5 2” 2” or 3” Manual* 83’
∗
Note: Manual models (“M” suffix) and 3 phase models, as designated above, require a separate approved pump control device or
panel for automatic operation. Operation of these models will be according to the control selected. Make sure the electrical
specifications of the control selected properly match the electrical specifications of the pump. 3 phase models require overload
elements selected or adjusted in accordance with the control or panel instructions.