Spec Sheet

LE50-Series

Sewage

Pumps

1/2 hp

2" Solids-Handling

118 GPM at 10' TDH

25' Maximum Head

Features:

• Heavy cast iron construction

• Oil filled, thermally protected motor

• Permanently lubricated bearings

• 2-vane, corrosion resistant

*HYTREL

impeller

• All stainless steel fasteners and

rotor shaft

• Quick-disconnect 10' standard power

cord allows replacement of cord

in seconds without breaking seals

to motor. (25' length optional)

*HYTREL

is a registered trademark of DuPont Polymers

Vertical

float models

available

in 115 V

PAGE 1
LE50-Series Sewage Pumps 1/2 hp 2" Solids-Handling 118 GPM at 10' TDH 25' Maximum Head Features: • Heavy cast iron construction • Oil filled, thermally protected motor • Permanently lubricated bearings • 2-vane, corrosion resistant *HYTREL® impeller • All stainless steel fasteners and rotor shaft • Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor.
PAGE 2
LE50-SERIES TECHNICAL SPECIFICATIONS PUMP IMPELLER The pump(s) shall be model _________________ as manufactured by Liberty Pumps, Bergen, NY, or equal. The pump(s) shall have a capacity of ____ GPM at a total dynamic head of ____ feet. Motor size shall be 1/2 horsepower, single phase, 60 hz. and ____ volt operation. The pump shall have a 2-vane semi-open impeller capable of passing a 2” spherical solid.