Product Overview

ManualsBrandsLiberty Pumps ManualsLE100 Series 1 HP1 HP Manual Submersible Sewage Pump - 575v - 25 ft Cord - 3" Discharge - 3 Phase

LE100-Series

Sewage

Pumps

1 hp

2" Solids-Handling

2" or 3" Flanged

Discharge

Features:

• Rugged 2 vane, semi-open

cast iron impellers

• Cast iron housings and volute

with all stainless and

brass fasteners

• 416 stainless steel rotor shaft

• Oil-filled, hermetically

sealed motors

• Built-in thermal protection on

single phase models

• 2" or 3" flanged discharge

• Permanently lubricated upper

and lower ball bearings

• Unitized shaft seals

• Single float mechanical level

control with series plug for

manual bypass operation–

standard on single-phase

automatic models

• Adjustable pumping range

• Quick-disconnect 10' standard

power cord allows replace-

ment of cord in seconds with-

out breaking seals to motor.

(25' length optional)

LE100-Series

Models:

SINGLE PHASE

LE102M 208-230V, 8a, manual

LE102A 208-230V, 8a, automatic

3-PHASE

LE103M 208-230V, 5.3a, manual*

LE104M 440-480V, 2.5a, manual*

LE105M 575V, 1.9a, manual*

*NOTE: 3-phase models require control panel for automatic

operation. See sewage accessories literature for complete

information on all Simplex and Duplex controls.

LE100 V6:LE100 V4 8/24/11 1:14 PM Page 1

Summary of content (2 pages)

PAGE 1
LE100 V6:LE100 V4 8/24/11 1:14 PM Page 1 LE100-Series Sewage Pumps 1 hp 2" Solids-Handling 2" or 3" Flanged Discharge Features: • Rugged 2 vane, semi-open cast iron impellers • Cast iron housings and volute with all stainless and brass fasteners • 416 stainless steel rotor shaft • Oil-filled, hermetically sealed motors • Built-in thermal protection on single phase models • 2" or 3" flanged discharge • Permanently lubricated upper and lower ball bearings • Unitized shaft seals Models: SINGLE PHASE LE102
PAGE 2
LE100 V6:LE100 V4 8/24/11 1:14 PM Page 2 LE100-SERIES TECHNICAL SPECIFICATIONS PUMP IMPELLER The pump(s) shall be model __________________ as manufactured by Liberty Pumps, Bergen, N.Y. or equal. The pump(s) shall have a capacity of ______ GPM at a total dynamic head of ________ feet. Motor size shall be 1 horsepower, ________ phase, 60 hz. and _______ volt operation. The pump impeller shall be cast iron, 2 vane, semi-open, and shall be capable of passing a 2" spherical solid.