Product Overview

Innovative FLOAT-LESS Technology
Smart touch pad and status in
Smart touch pad and status ind
Panel Features:
Enclosure NEMA 4X weatherproof
for indoor or outdoor mounting.
Red Alarm Beacon.
Exterior Alarm Test/Normal/Silence
Switch allows horn and light to
be tested and horn to be silenced.
Alarm automatically resets when
alarm condition is cleared.
Alarm Horn provides audio
warning of alarm condition
(83 to 85 decibel rating).
Circuit Breakers provide pump
disconnect and branch circuit
protection.
Power Relays control pump
by switching electrical lines.
Definite purpose contactors
used when pump full load
amps are above 15.
Incoming Control/
Alarm Power and Pump
Terminal Block Control
Power Indicator with fuse
indicator light illuminates
if control power is present
in panel. Alarm activates
if fuse is blown.
Alarm Power
Indicator with Fuse
indicator light illumi-
nates if alarm power
is present in panel.
24
3
⁄ 8 "
®
Certified Pumps
CUS
IP-Series
TM
Simplex and
Duplex
Controls
The compact level sensor
detects the liquid level
in the tank and sends a
signal to the IP panel which
displays this level in inches
or centimeters for easier
monitoring of the system.
Pump activation and alarm
levels can be adjusted
using the panel touch
pad - eliminating the
need to go into the tank
for manual adjustment.
Float-less Level
Sensor Features:
• Compact design for
confined space
applications
• Operates on low voltage
• One sensor takes the
place of up to 4 floats!
•
Easy to install and adjust
set points
• Level sensor operating
range is 3" to 39.9"
(7.6 to 101.3 cm).
• 4' vent tube
• Cord length from vent
is 20'
• Stainless steel clamps
for mounting
• A redundant “Alarm”
float is included for
extra security.
Note: Float tree not included
IP Series V6 2/7/11 2:13 PM Page 2