Product Overview

Pre-Assembled

Sewage Ejector

System

2" Solids-Handling

2" or 3" Discharge

For multi-unit

residential and

commercial

installations

up to 250

fixture units.

Features:

• Stainless steel cover bolts

• 2" or 3" discharge

• 2" or 3" threaded vent flange

• 4" inlet hub with rubber pipe seal

• Heavy-duty structural foam basin

• “Torque-stop” pump restraints

• Compression molded fiberglass

cover with no-skid pattern

SIMPLEX

700-Series

Basin Specifications:

Dimensions: 24" x 36"

Total Capacity: 70 U.S. gallons

Volume Per Cycle: 20.5 U.S. gallons

700-Series V7: 700-SeriesV4 8/30/11 1:47 PM Page 1

PAGE 1
700-Series V7: 700-SeriesV4 8/30/11 1:47 PM Page 1 SIMPLEX 700-Series Pre-Assembled Sewage Ejector System 2" Solids-Handling 2" or 3" Discharge For multi-unit residential and commercial installations up to 250 fixture units.
PAGE 2
700-Series V7: 700-SeriesV4 8/30/11 1:47 PM Page 2 700-SERIES TECHNICAL SPECIFICATIONS PRE-ASSEMBLED SEWAGE EJECTOR COVER Ejector system shall be model ________/________ as manufactured by Liberty Pumps, Bergen, N.Y. or equal. The system shall be factory pre-assembled with pump and automatic control(s) pre-mounted requiring no system assembly at job-site. The cover shall be constructed of compression molded fiberglass with no-skid pattern.