Specification Sheet

CENTURY
Towel Shelf with Bar
TECHNICAL DATA
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
Updated October 2006
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts
INSTALLATION:
MATERIALS:
Mount wall plates at 17 3/4" C-C for 18" shelf, 23 3/4" C-C for 24" shelf on wall surface in vertical position with
4- #8 x 1 1/4" roundhead zinc plated steel screws provided, or 4- #6/32 x 2" zinc plated steel toggle bolts provided.
Slip pre-assembled towel shelf with bar over wall plates and tighten set screws until secure. Wood blocking is
preferable behind all wall surfaces. If wood blocking is not available, the following optional fasteners are suggested:
Inner Wall Flange - 16 gauge type 304 stainless steel
Cover Wall Flange - 22 gauge type 304 stainless steel
Projecting Post - 22 gauge type 304 stainless steel
Cross Bar - 5/16" square .015 (28 gauge) type 430 stainless steel
Towel Bar - 5/16" square .015 (28 gauge) type 430 stainless steel
Towel Bar Post - 22 gauge type 304 stainless steel
All components welded construction with concealed screw attachment on 16 gauge stainless steel wall plate.
SPECIFICATION: Surface mounted towel shelf with bar shall be model
(fill in model number) by Liberty Hardware Manufacturing Corporation.
(654 mm)
(603 mm)
(610 mm)
(502 mm)
(451 mm)
(457 mm)
25 3/4"
23 3/4"
24"
19 3/4"DIM "B"
17 3/4"DIM "A"
18"
LENGTH
1 3/4"
[44 mm]
6"
[152mm]
8 7/8"
[225 mm]
1/2"
[13 mm]
2"
[51 mm]
2"
[51 mm]
"A"
"B"