User's Manual

-58-
Services
Frame type 1 = Keep-Alive frame
Name Description
sensor_msb
Times that the sensor is used in the las 24 hours.
sensor_lsb
sigfox_msb
Times that the Sigfox radio is used in the last 24 hours.
sigfox_lsb
lorawan_msb
Times that the LoRaWAN radio is used in the last 24 hours.
lorawan_lsb
resets_today
Number of resets generated in the last 24 hours.
CONFIG_ID
9DOXHRIWKHFRQȴJXUDWLRQYHUVLRQORDGHGLQWRWKHQRGH
This class will generate automatically the response for this frame type which is formed by 8 bytes with the following
structure:
Byte bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
0
Bytes reserved for the information saved in the FRQȴJXUDWLRQLQLȴOHRIWKHVSHFLȴFGHYLFH
1
2
3
4
5
6 Timestamp (hh) º hour with two numbers
7
Enable
daily
frame
Reset Timestamp (mm) º minutes with two numbers
Frame type 3 = Error frame
Name Description
error_z
Error detected in the X axis of the sensor.
>ߙߚ HUURU_ߙߚ QRHUURU@
error_y
Error detected in the X axis of the sensor.
>ߙߚ HUURU_ߙߚ QRHUURU@
error_x
Error detected in the X axis of the sensor.
>ߙߚ HUURU_ߙߚ QRHUURU@
error_rtc
Error detected in the RTC (internal clock).
>ߙߚ HUURU_ߙߚ QRHUURU@
error_lorawan
Error detected in the LoRaWAN radio.
>ߙߚ HUURU_ߙߚ QRHUURU@
error_sigfox
Error detected in the Sigfox radio.
>ߙߚ HUURU_ߙߚ QRHUURU@
temperature_msb
Raw temperature from the parking internal sensor.
To convert to Celsius degrees use the next formula:
2QO\DYDLODEOHLQȴUPZDUHY[[
temperature_lsb
temperature
Temperature (Celsius degrees) from the node’s internal sensor. The value of
temperature is a signed integer.
2QO\DYDLODEOHIURPȴUPZDUHY[[