User's Manual

-12-
Frames
7.1.2. Keep-Alive frame
This frame is used to indicate that the parking slot has not changed, but the node is still working.
Byte Name Description
0 Basic data Detailed description in section “Frame”
1 Frame counter Detailed description in section “Frame”
2 Timestamp (hh) Current hours
3 Timestamp (mm) Current minutes
4 Temperature
Temperature (Celsius degrees) from the node's internal sensor. The
value of temperature is a signed integer.
5 X axis measurement MSB
Raw value from the sensor associated to the X axis. The value stored in
these two bytes is a 16-bit value in 2’s complement form,.
6 X axis measurement LSB
7 Y axis measurement MSB
Raw value from the sensor associated to the Y axis. The value stored in
these two bytes is a 16-bit value in 2’s complement form.
8 Y axis measurement LSB
9 Z axis measurement MSB
Raw value from the sensor associated to the Z axis. The value stored in
these two bytes is a 16-bit value in 2’s complement form.
10 Z axis measurement LSB
Figure : Keep-Alive frame structure
7.1.3. Daily update frame
This frame is sent daily at 1 AM. It contains a little summary.
Byte Name Description
0 Basic data Detailed description in section “Frame”
1 Frame counter Detailed description in section “Frame”
2 Sensor measurements MSB
Unsigned 16 bit counter. It stores the times that the sensor is used
in the last 24 hours.
3 Sensor measurements LSB
4 Sigfox transmissions MSB
Unsigned 16 bit counter. It stores the times that Sigfox radio is
used in the last 24 hours.
5 Sigfox transmissions LSB
6 LoRaWAN transmissions MSB
Unsigned 16 bit counter. It stores the times that LoRaWAN radio is
used in the last 24 hours.
7 LoRaWAN transmissions LSB
8 Resets Number of resets generated in the last 24 hours
9 &RQȴJBLG 9DOXHRIWKHFRQȴJXUDWLRQYHUVLRQORDGHGLQWRWKHQRGH
10 Reserved Reserved bytes. Do not consider.
Figure : Daily update frame structure
This frame can be deactivated using the Plug & Sense! Smart Parking USB Programmer or via radio, with the
Remote Manager, setting to 0 the enable/disable daily frame bit.
The daily update frame is very special because the node waits for a response after it is sent. This response is useful
IRUUHFRQȴJXULQJWKHQRGHȊRYHUWKHDLUȋZLWKRXWSK\VLFDODFFHVV$OVRDVHFRQGXVHRIWKLVUHVSRQVHIUDPHLVWR
V\QFKURQL]HWKHQRGHȇVLQWHUQDOFORFNWKDQNVWRDWLPHVWDPS7KLVUHVSRQVHFDQEHFRQȴJXUHGXVLQJWKHUHPRWH
PHP.