H38B; H38B
C: Mounting of the camera Firmly tighten the tilt lock when mounting or dismounting the camera. Also after the camera was mounted on the head, do not add accessories and others on it. With thehead suddenly tilt backward or forward, it may cause damage to the camera. Removing the sliding plate: Loosen the sliding plate lock. Slide backwards the sliding plate while pressing the plate release button. Attaching the sliding plate: Set the camera screws and video pin to the camera and tighten firmly.
D: Adjusting of sliding plate If the camera tilts to the backward or forward, adjustment is needed to shift the sliding plate front or behind. The head may tilt while adjusting the sliding plate. Keep hold of the camera to ensure it does not fall off. Hold the camera and loosened the sliding plate lock. Move the sliding plate front or back and find the position where the tilt balancing can be obtained, secure and tighten the sliding plate lock.
Firmly tighten the pan lock, if locking is necessary. Firmly tighten the tilt lock, if locking is necessary.
