User manual

12
Installation
Remove Front Panel
Install Leg Base (For floor standing type)
1.Remove screws both left and right from
the lid as shown in figure 1 .
2.Open the lid,then you can find another 4
screws(both left and right).
3.Remove screws from the front panel
(both left and right)
4.Remove the front panel carefully
To assembly,perform the procedure
in opposite order.
According to the picture, install the Leg Base
(Both left and right).
Preparing Work for Installation
Leg Base
Leg Base
(Accessory)
(Accessory)
Fan Coil Unit
1
2
3
4