User Manual

Table Of Contents
11
INSTALLATION
ENGLISH
Connect the appliance to an earthed socket in
accordance with current wiring regulations.
The appliance must be positioned so that the
plug is easily accessible.
Power outlet must be within 1 meter of either
side of the appliance.
WARNING
Repairs to the appliance must only be carried out
by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or
serious malfunctioning. Contact your local
authorised LG repairer.
The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Stacking Mini Washer and
Main Washer
Needed Accessories
a
Front Brackets (2EA)
b
Back Brackets (2EA)
c
Machine Screw (40EA)
d
Short Sheet Metal Screw (5 EA)
e
Long Sheet Metal Screw (11 EA)
NOTE
Accessories are subject to change by the
manufacturer without prior notice for product
improvement purposes.
Attaching Brackets on Mini
Washer
1
After removing the carton and shipping
material, lift the Mini Washer off the foam
base, and keep 4 brackets on the foam base.
Make sure the plastic tub support comes off
with the base and is not stuck to the bottom
of the Mini Washer.
2
Remove and save the foam block for future
use.
If the Mini Washer must be moved in the
future, the foam block will help prevent
damage to the Mini Washer during
transportation.
To prevent damage, do not remove the foam
block until the Mini Washer is at the final
location.
3
Turn the top cover about 180 degrees, cover
the opening in the top with the top cover and
install 4 short sheet metal screw.