Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- OPERATION
- Operating Control Panel
- Changing Settings
- Getting Started
- Settings
- Lockout
- Date & Time
- Clock Themes
- Sabbath Mode
- Wi-Fi
- Remote Start
- Brightness
- Display
- Convection Auto Conversion
- Language Selection
- Volume
- Preheat Alarm Light
- Temperature Adjustment
- Temperature Units
- Smart Diagnosis™
- Program Update
- Demo Mode
- Factory Data Reset
- Open Source License
- Oven Cooling
- Timer
- Operating the Oven
- Before Using the Oven
- Using Standard Oven Racks
- Using Gliding Oven Racks
- Instaview
- Convection Bake and Roast Mode
- Bake Mode
- Recommended Baking Guide
- Broil Mode
- Recommended Broiling Guide
- Warm Mode
- Proof Mode
- Air Fry
- Recommended Air Frying Guide
- Probe Mode
- Recommended Probe Guide
- Favorite Mode
- Auto Cook Mode
- Auto Cook Guide
- Steam Function
- Steam Bake Mode
- Sous Vide
- Sous Vide Cooking Guide
- Remote Start Mode
- SMART FUNCTIONS
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
50 MAINTENANCE
WARNING
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the appliance
at the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
• Wear gloves while changing the oven light. Glass
fragments from broken bulbs can cause risk of
injury.
• Gently twist the screwdriver blade while
changing the oven light. If you apply force, the
glass or oven may crack.
1 Unplug the oven or disconnect power.
2 Remove the oven racks.
3 Slide a flat blade screwdriver a between the
housing and the glass light cover
b.
4 Support the glass light cover with two fingers
to prevent the cover from falling to the
bottom of the oven.
5 Gently twist the screwdriver blade to loosen
the glass light cover
c.
6 Remove the bulb from the socket.
7 Replace the bulb, and reassemble the light
cover by snapping it back into place.
8 Plug in the oven or reconnect power.