Owner's Manual

9
How to use
Using the Product
Handle power button
Vacuum power button
Speed button
(High or Low)
Battery
indicator
Groove
Make sure the assembly
part has docked correctly.
Projection
Battery indicator
Press the power button to turn on the
product.
• When you use the vacuum cleaner,
select the motor speed with the speed
button.
• If the product doesn’t work, check the
battery indicator for a visual display.
Battery indicator shows remaining charge.
• A fully charged battery lasts for 20 minutes
at the high speed and for 30 minutes at the
normal speed (depending on the floor type).
• When the battery power level is low, the
battery indicator shows one blinking light,
and then the power turns off soon after.
Place the rear bottom of the main
body on the charger as shown on
the figure.
Make sure the assembly part has
docked correctly.
WARNING
Do not use this cleaner to vacuum liquids.
Vacuuming liquids will cause the unit to
malfunction.