Owner's Manual

20
CLEANING MODES

the power supply is turned off.

select another mode. Cleaning will then start from the beginning.

obstacles. This may be caused by a reflective or dissimilar surface, or a compromised
lower infrared sensor.
Tip

operation to clean each and every spot in the
cleaning area.
If you need to quickly clean an area choose



'Start' button.
※

In 'Cell by Cell' mode, Robot Cleaner cleans the
area by dividing it into rectangular spaces.
For meticulous cleaning, select this mode.

select 'Cell by Cell' mode and press 'Start' button.
The 1st stage:
The maximum outline of 3 m x 3 m of cleaning
area will be cleaned. (The size of the outline
may vary in accordance with the shape of the
area to be cleaned.)
The 2nd stage:
The 2nd stage of Cell by Cell cleaning engages

When the 1st, and 2nd stages are completed,
the cleaned area will be cleaned again through
the repetition of the above cleaning method as
the Robot cleaner advances to the next part of
cleaning area.
Zigzag Cleaning
Cell by Cell Cleaning