Owner's Manual

60
BEFORE YOU CALL FOR SERVICE
Confirm before reporting the failure of Robot Cleaner.
Problem Solutions (Reference page)
The power supply cannot be
turned on.
Check that the power switch is turned on. (Page 16)
The power supply
automatically turns off.
This is not a failure. Robot Cleaner has its own power saving
function.
If it is not used for ten minutes after the power supply is turned on,
the power will automatically turn off. (Page 18)
The Robot Cleaner will not
charge.
Ƭ Check whether the main power switch is turned on. (Page 16)
Ƭ Remove objects around the home station. (Page 15)
Ƭ Confirm that the power supply is connected to the home station.
(Page 15)
Ƭ Wipe the charging terminals with a dry cloth. (Page 54)
Suction power becomes
weak.
Ƭ Check whether there is foreign material blocking the suction port.
(Page 53)
Ƭ Empty the dust bin. (Page 51)
Ƭ Clean the dust bin filter. (Page 52)
Noise becomes louder. Ƭ Confirm that the dust bin has been mounted properly. (Page 58)
Ƭ Confirm that the dust bin filter has been mounted properly.
(Page 52)
Ƭ Check whether foreign material is caught in the brush. (Page 53)
The Robot Cleaner will not
activate.
Ƭ Confirm that the power switch is turned on. (Page 16)
Ƭ Confirm that the battery has been charged. (Page 19)
The lower brush does not
rotate.
Ƭ Clean the brush. (Page 53)
Ƭ Confirm that the brush has been mounted properly. (Page 53)
Movements or travel path are
abnormal.
Ƭ Carefully wipe the sensors with a dry soft cloth. (Page 54)
Ƭ If the ultra microfiber mop is attached, confirm that it is mounted
properly. (Page 26)
Ƭ Turn the main power switch off and on.
The Robot Cleaner cannot
be activated with the remote
control.
Ƭ Replace the remote control batteries. (Page 13)
Ƭ Confirm that the control is within the coverage area of the main
unit, which is less than 3
m
. (Page 13)
Ƭ Check whether the main power switch is turned on. (Page 16)
※
To improve the quality of the application in use, modifications may be proceeded without notice to
customers. The maunals for the modified applications can be downloaded at LGE website.
(http://www.lg.com)