Owner's Manual

10
BUTTON FUNCTIONS – ROBOT CLEANER
• If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation.
• If the button is pressed whilst in ‘Turbo Mode’, it will be canceled.
• Used to change the clean mode setting.
If the machine is at the Home Station, ‘Spot Clean’ option is not available.
The 'My Space' mode can only be selected by remote control (when the
Robot Cleaner is not on the home station).
• Used to return the Robot Cleaner back to the home station for charging.
If cleaning is finished or the battery is low, the Robot Cleaner will return to
the Home Station by itself to recharge its battery.
Pressing the ‘HOME’ button for 3 seconds will change the Voice for the voice
message.
• You cannot use this function with the button on the remote controller.
Pressing the ‘Turbo' and 'Mode' button for 3 seconds will activate or
deactivate the Lock function.
If 'Lock' is ON, a voice announcement "Key lock has already been set" will be
heard each time a button is pressed.
Put your smartphone on "Tag On" for registration.
You can also register your Robot Cleaner via NFC of your smartphone without
going through the registration process.
Press and hold down the MODE and HOME buttons for 3 seconds to activate
or deactivate the front camera.
Home Guard and Home View will not be available with the front camera disabled.
Press and hold down the Turbo button for 3 seconds to activate the
registration mode with a voice message.
This mode is for registering the product to Robot Cleaner over Wi-Fi.
• Used to turn the power on from Standby, start or stop cleaning.
• If the button is pressed whilst the unit is powered ON, it will start cleaning.
• If button is pressed during the cleaning, it will stop the cleaning.
If the button is pressed for about 2 sec. whilst the power is ON, the power will
be returned to Standby.
• If the button is pressed in 'Smart Diagnosis' mode, it will end the diagnosis.
TURBO
MODE
HOME
Language
BUTTON(KEY)
LOCK ON/OFF
Product
registration
(NFC)
Front camera
On/OFF
Product
registration
(Wi-Fi)
START/STOP