Owner's Manual

9
How to use
When using sterilization station (Depending on Model)
1 2 3
➋ Place the product on the
station in such a way that
the rear side of the product
to allow the groove on the
bottom of the product is
caught on the protrusion of
the station.
➌ When the product is correctly
placed on the sterilizer station,
a blue indicator lights on the
UV lamp status screen and
the UV lamp starts operation
for sterilization.
The indicator and the UV
lamp are turned off 5 minutes
after placing the product on
the sterilizer station, and
sterilization stops.
➊ Place the product on the station
in such a way that the front
side of the product is placed
first on the station to allow the
gap on the vibration plate of the
product to be inserted on the
sill of the station.
Sill
Gap
Groove
Protrusion