User Guide

73
Settings
Requirements:
●
UX830 Phone
●
UX830 USB Cable
●
microSD
TM
card installed on
the phone
●
Windows XP
®
Computer
Steps to using USB Mass Storage
mode:
1. Install the USB Cable drivers
into the computer.
2. After installing the USB cable
drivers, connect the cable to
the computer and attach the
phone. Allow the computer to
detect the phone USB drivers
and install them.
3. Make sure the microSD
TM
card
has been formatted on the
phone so the required folders
will be created for use with
your phone. To format the
memory card navigate the
phone to Menu > Settings >
Phone Information >
6. Memory > 3. Card Memory
and select the Format option.
Select YES to format the
microSD
™
card.
4. On the phone, go to Menu >
Settings > USB Connection >
USB Mass Storage.
A prompt will be displayed
stating “USB Connection Set”.
Press END key to return to
standby mode. After a few
seconds, a new explorer
window containing the
following folders should pop
up on the computer screen:
Note
If an error message saying, "Not
available during the UMS mode",
follow these steps:
Touch > > > USB Modem
Try the card again.
UX830_Eng.qxd 4/18/08 6:08 PM Page 73