Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• The appliance shall be stored so as to prevent mechanical damage from

occurring.

• Refrigerant tubing shall be protected or enclosed to avoid damage.

• Flexible refrigerant connectors (such as connecting lines between the indoor

and outdoor unit) that may be displaced during normal operations shall be

protected against mechanical damage.

• The installation of pipe-work shall be kept to a minimum.

• Pipe-work shall be protected from physical damage.

• A brazed, welded, or mechanical connection shall be made before opening the

valves to permit refrigerant to flow between the refrigerating system parts.

• Keep level parallel in installing the product. Otherwise, it may cause vibration or

water leakage. It may cause injury or an accident.

Operation

• Do not use the product for special purposes, such as preserving foods, works

of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

There is risk of damage or loss of property.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing

water etc. There is risk of fire, electric shock, or damage to the plastic parts of

the product.

• Do not touch the metal parts of the product when removing the air filter. There

is risk of personal injury.

• Do not step on or put anyting on the product. There is risk of personal injury

and failure of product.

• Always insert the filter securely after cleaning. Clean the filter every two weeks

or more often if necessary. A dirty filter reduces the efficiency.

• Do not insert hands or other objects through the air inlet or outlet while the

product is operating. There are sharp and moving parts that could cause

personal injury.

• Be cautious when unpacking and installing the product. Sharp edges could

cause injury.

• If the refrigerant gas leaks during the repair, do not touch the leakaing

refrigerant gas. The refrigernat gas can cause frostbite (cold burn).

• Do not tilt the unit when removing or uninstalling it. The condensed water

inside can spill.

• Do not touch refrigerant pipe and water pipe or any internal parts while the unit

is operating or immediately after operation. It can cause a burn or frostbite.

• If the refrigerant gas leaks during the installation, ventilate the area

immediately. Otherwise it can be harmfull for your health.