Colour Monitor USER GUIDE MANUAL D'UTILISATION GUIA DEL USUARIO MANUAL DO MODEL : PROPRIETARIO StudioWorks5D
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction 1 Monitor 2 Registration Important Precautions 3 Installation 5 Location and Function of Controls 6 Control Panel Function 7 On Screen 8 Display (OSD) Control Adjustment Sound Selection and General Power Adjustment 12 13 Operation Management System 14 Image Adjustment 14 Video Modes 15 Microphone Operation 17 Audio Features 17 Audio Connections 17 Low Radiation 18 Self Memory Compliance (MPR II) 18 Diagnostics DDC (Display Data Chan
Introduction Thank you for purchasing a Goldstar color monitor. This monitor supports OSD, DDC1, DDC2B, DDC2AB, and Sound. It will give you high resolution performance and operation in a variety of video operating modes. It is compatible with standard PC type personal computers. The 15-inch flat Square Tube design (13.6 inches viewable) is excellent for use in a Windows or desktop publishing environment, where smaller screen sizes result in images difficult to see easily.
Monitor Registration The model and serial numbers These numbers You as a are found on the rear of this unit. unique to this unit and not available to others. should record requested information here and retain this guide permanent record of your purchase. Staple your receipt here. are Date of Purchase : Dealer Purchased From : Dealer Address : Dealer Phone No. : Model No. : Serial No. : Notice All rights reserved.
Important This unit has Precautions been engineered and manufactured to assure your improper use can result in potential electrical shock or fire hazard. In order not to defeat the safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Also follow all warnings and instructions marked directly on your monitor. personal safety, On but safety 1. Use only the power cord supplied with the unit.
Keep children from monitor's cabinet dropping or pushing objects into the openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning unattended for an storm or when the monitor is to be left extended period of time, it from the wall unplug outlet. Do not the bring magnetic picture tube. devices such as magnets or motors near On installation 1. Do not allow do not place 2.
Installation supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display. The Connections To connect your monitor after the video 1. Turn OFF the power to your get 3. Connect the board 4. on panel signal your PC is properly installed: computer and all its attached options. 2.
Location and Function of Controls Front View Power ON/OFF Switch Headphone Jack Power (DPMS) Indicator Microphone Built-in Jack Microphone Control Panel Function Contrast Brightness Adjustment Adjustment Control Control Rear View ID Label MIC OUT AC Power Socket Audio In 6 D-Sub Signal Cable
Control Panel Function OSD Select /Adjust Control Sound Mute Power Indicator Power Button MIC Brightness Contrast Sound Menu Increase OSD ON/OFF Enter Button Decrease Buttons the front of the monitor allow you to adjust the image easily through an OSD menu. As you choose controls, the selected icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls. The following is a description of use for each button.
Adjustment Control Use this buttons for selecting (highlighting) an OSD icon is also used for selecting the level of the selected item to Sound : To adjust sound Sound Mute Used to select mute sound on). MIC : On Screen Built-in on to be be adjusted. adjusted. It menu. (means sound off) and mute off (means microphone.
On Screen You item were using Display(OSD) introduced to the the OSD system. Listed below items that Selection and are are Adjustment of selection and procedure the icons, icon names, and icon on the Menu. adjusting an of the descriptions shown OSD Symbol Horizontal Position Description To H move POSITION 50% U OSD MAIN: Horizontal Size screen Moves the screen left and right. image left. image right. ADJ: To H SIZE width.
OSD Symbol Description Tilt To correct TILT 50% U OSD MAIN: image rotation. Tilts the screen Tilts the screen image left. image right. ADJ: Zoom To Adjust OUT:IN U OSD MAIN: adjust Horizontal and Vertical image simultaneously. Smaller the image size. Bigger the image size. size ZOOM ADJ: Mode If the monitor is Recall RECALL YES U : OSD MAIN: operating in a factory preset mode, this control will reset the image to the factory preset mode.
OSD Symbol Description OSD Time OSD TIME SECONDS To select OSD display time To choose the language in which displayed. (seconds). 5103060 U OSD MAIN: ADJ: Language Select LANGUAGE ENGLISH DEUTSCH FRANCAIS ESPANOL ITALIANO U control the names are OSD MAIN: ADJ: Mode Information To inform users INFORMATION of preset and user mode data. U SEL: Exit OSD ADJ: To disappear 11 of the OSD on the screen.
Sound Selection and You item were using introduced to the the OSD system. Listed below items that Adjustment ( are are ) procedure of selection and the icons, icon names, and icon shown descriptions an of the the main Menu. on OSD Symbol adjusting Description Volume VOLUME Raises or lowers audio level. Raises or lowers treble level. Raises or lowers Bass level.
General After Operation following section on the control general installation directions and reviewing layout and function, you are ready to power-up the and operate the monitor. 1. Turn on the monitor by pressing the power button once. light Green or Amber. The monitor's power indicator will 2. Turn on the PC. booting (the PC power-up sequence and initialization) the power LED on the monitor should be illuminated Green.
Power Management System This monitor incorporates new circuitry for lowering energy usage during idle time, following the Display Power Management Signalling (DPMS) guide lines of the Video Electronics Standards Association (VESA), and is certified as exceeding the EPA's Energy Star program for reduced power usage. For the power savings feature to operate, the monitor must be used with either a PC having power saving circuitry.
To adjust 1) Press the OSD controls: an image select button ( ) or to highlight an item you wish to adjust. image. A display for that or pushing the keys. To other above and controls, repeat 3) adjust steps 1) 2). 4) Any image adjustments you make will be stored automatically in 2) Press either the button to or adjust the item will show the item level and effect of the monitor's memory. NOTE : Most menus will adjust an Video disappear after 5 or 6 second.
A note about the video memory modes: There is a total of 35 video memory modes, generally more modes than you will use at any one time. Of these 35 modes, 7 are permanent, factory fixed modes that cannot be changed, and another 7 are set at the but may be overwritten to make more room. The remaining 21 left blank (empty).
Microphone Operation On the left side there is MIC (Microphone) jack. By plugging a long length of cable needed to use this MIC jack, you need to to into the rear of the monitor (MIC OUT) (supplied) plug MIC input jack of your sound card (if available). a microphone in here, it may reduce the reach the PC's sound card. In order to use a cable and into the Audio Features A major feature of this monitor is its built-in audio system.
Low Radiation Compliance (MPR II) This monitor meets one of the strictest guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range.
Troubleshooting Symptom: Possible The Self causes: signal Symptom: Possible diagnostics message. cable is not connected. The power LED is illuminated orange or blinking orange. causes: Display power management mode. no sync signal. The signal cable is not fastened securely. Check the computer power and graphics adapter configuration. The frequency of the sync input is outside the operating range of These is the monitor.
Service 1. the monitor from the wall outlet and refer servicing to personnel when : The power cord or plug is damaged or frayed. Liquid has been spilled into the monitor. The monitor has been exposed to rain or water. The monitor does not operate normally following the operating instructions. Adjust only those controls that are covered in the operating instructions.
Specifications Sync signal types Green video Type : no D P M V.sync H. sync Video separate sync (N.C H. sync V. sync connection) (Display MODE Power Management) Power LED Color H.sync V.
Specifications Picture tube 15 inch (13.6 inches Darkface, 0.28 mm viewable) FST, Non-glare, pitch 90 degree deflection, dot Sync Input Horizontal Freq. : 30KHz 64 KHz (Automatic) Vertical Freq. : 50Hz 120Hz (Automatic) Input Form : Separate, TTL, positive/negative Signal input : 15 pin D-Sub connector - - Video Input DisplayArea:10.2x7.5inches/260x190mm(HxV) Input Form : Separate, RGB Analog, 0.
GOLDSTAR MONITOR LIMITED WARRANTY LG Electronics U.S.A., Inc. will repair or at its option replace, without charge, your product which proves workmanship under normal use, during the warranty period listed below from the date of original purchase. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S. including Alaska, Hawaii and U.S.
COLOR MONITOR OWNER'S MANUAL Please before carefully read this manual attempting to operate your MODEL P/NO : : StudioWorks 5D 3828TUL003N (S-9611) monitor.
