OWNER’S MANUAL SH8 SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar Please read this manual carefully before operating your set and retain it for future reference. MODEL SH8 www.lg.
Getting Started Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started 5 Declaration of Conformity LG Electronics European Shared Service Center B.V. Krijgsman 1 1186 DM Amstelveen The Netherlands or can be requested at our dedicated DoC website: http://www.lg.com/global/support/cedoc/cedoc# This device is a 2.4 GHz and 5 GHz wideband transmission system, intended for use in all EU member states and EFTA countries, with indoor use restriction for 5 GHz band.
Table of Contents Table of Contents 26 39 – Connecting the speaker to your network with a LAN cable – Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) – Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connecting the speakers to your Home Network (Additional) – Connecting the additional speaker to your network with a LAN cable – Connecting the additional speaker to your network via the Wi-Fi Setup Method Using the Bridge – Use as a root device (wired
Table of Contents 58 58 58 60 60 60 60 60 60 61 61 62 62 62 62 62 63 63 63 63 63 – About Bluetooth – Bluetooth profiles – Listening to Music of a Bluetooth Device Other operations – DRC (Dynamic Range Control) – AV Sync – Turn off the sound temporarily – Sleep timer setting – Auto power down – Using your TV remote control – AUTO POWER On/Off – Auto Display Off / Dimmer Sound adjustment – Adjust volume level automatically – Adjust the Treble/Bass/Sub-woofer – Night mode Standby mode – Standby mode – Network
Getting Started Main Features 1 Introduction Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. Symbol used in this manual ,,Note Indicates special notes and operating features. >>Caution LG Sound Sync Indicates cautions for preventing possible damages from abuse. Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync.
Getting Started 9 Front panel 1 Getting Started A LED indicator Shows connection status. D The buttons are located on the rear. B Display window C Remote sensor Rear panel HDMI IN A 1/! (Standby/On) F (Function): Selects the function and input source. (OPTICAL / HDMI IN / WI-FI / BT READY / LG TV / PORTABLE / MIC) -/+ (Volume) (Wi-Fi): Connects initial MUSICflow product to your network wirelessly. (Add): Adds the additional MUSICflow product to your network.
Getting Started Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. F : Selects the function and the input source. 1 SOUND EFFECT : Selects a sound effect mode. Getting Started (Mute) : Mutes the sound. : Set Night mode to On to reduce the sound intensity and improve fineness and softness. : Adjusts sound level of Treble, Bass and Subwoofer. VOL o/p : Adjusts speaker volume.
Getting Started 11 Installing the sound bar You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. You can mount the main unit on a wall. You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. TV 1 Getting Started 6. Fix the unit with the screws firmly. 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Connecting 13 Organizing cables Organize the cable with cable holder. 1. Attach and fix the cable holder as shown below. 2. Insert cables to the cable holder. Connect the speaker to the power supply with the supplied AC adapter. 1. Connect the supplied AC power cord to the AC adapter. 2. Connect the AC adapter cable to DC IN adapter input. 3. Plug the AC power cord into an AC outlet. LED indicator of wireless subwoofer LED Color Status Green (Blink) The connection is trying.
Connecting 3. If the LED of the wireless subwoofer already blinks in green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. Red Green Connecting to your TV Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. Using an OPTICAL cable 1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable.
Connecting 15 LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Optical cable Refer to the TV’s instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment.
Connecting Using an HDMI cable HDMI cable Checklist If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Some HDMI cables do not support the ARC function, this can result in no sound output. Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV using an HDMI cable.
Connecting 17 What is SIMPLINK? ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control : Power on/off, volume up/down, etc. LG TV’s with SIMPLINK function has the logo as shown above.
Connecting Additional information for HDMI yy When you connect an HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. 2 - The connected device’s video input is set correctly for this unit. Connecting - The connected device is compatible with 720 x 576p, 1280 x 720p, 1920 x 1080i or 1920 x 1080p video input.
Connecting 19 For enjoying both sound and picture PORTABLE IN connection You can enjoy both sound and picture from the external device you connect. 2 Connecting HDMI OUT (TV ARC) Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. 2.
Connecting OPTICAL IN connection Connect an optical output jack of external devices to the OPTICAL IN jack. Optical cable 2 Connecting To the optical output jack of external device 1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your TV (or digital device etc.) Initial Multi-Room Setup When installing the MUSICflow product for the first time, you can choose two types of connection as below.
Connecting 21 Installing “Music Flow Player” App Through “iTunes store” or “Google Play Store” 1. Tap the “iTunes store” icon or “Google Play Store” icon. 3. Select “Music Flow Player” in the search result list to download. ,,Note yy Music Flow Player app will be available in version of the software as follow; Android OS : Ver 4.0 (ICS) (or later) iOS O/S : Ver 6.0 (or later) yy Make sure that your smart device is connected to the internet.
Connecting 3. Select [Connect product] to install the speaker you’ve purchased. 1. Plug in the desired device, and tap [Next]. 2 Connecting Refer to “Connecting the speaker to your Home Network” on page 26. 2. App searches for the speaker and connects it automatically, Tap [Next]. ,,Note If you want to return to the terms of use screen, initialize the Music Flow Player app on the smart device’s setting menu.
Connecting 23 4. After typing password, tap [Next]. Using Media Server for PC Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. Before connecting to PC to play a file, Media server Software should be installed on your PC. Make sure that wireless network environment using a router is installed at your home. 5. Tap [Finish] to finish making the connection.
Connecting ,,Note yy Music Flow PC Software is not supported with Mac OS. In case of Mac OS, you can use the Nero MediaHome. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker. 2 yy If you want a full explanation about Music Flow PC Software, click the question marked icon on home menu.
Connecting 25 System requirements (Macintosh) yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard) yy Macintosh computer with an Intel x86 processor yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone yy Memory: 256 MB RAM Sharing music files This parts explains the procedure for selecting the shared folders on your computer. 1. Double-click the “Nero MediaHome 4 Essentials” icon. 2.
Connecting Connecting the speaker to your network with a LAN cable 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Connection overview Broadband service 2 Connecting Router LAN 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 27 5. Connect one end of the LAN cable to the speaker’s LAN port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. (If there is an update) 8. This application is checking the Version of software of your speaker and then shows the version. 2 Connecting 6. Then select [Next] on the screen. Select [Next] after checking the version information. 9. Select [Start] to curate your music on your smart device. 7.
Connecting Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview 2 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service Connecting Router 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 29 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 9. Then select [Next] on the screen. 2 8. If you have a password for your network, the security screen appears on your smart device. Enter your password. Connecting 7. Then select [Next] on the screen. 10. Select [Finish] to complete the connection. After speaker connection, follow the instructions for TV connection.
Connecting (If there is an update) 11. This application is checking the Version of software of your speaker and then shows the version. Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview Broadband service 2 Connecting Router Select [Next] after checking the version information. 12. Select [Start] to curate your music on your smart device.
Connecting 31 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 3. Select the product you want to connect and tap [Next] on the screen. 4. Select [Wireless connection] on the screen. 5.
Connecting 8. On your iOS device, go to iOS setting -> Wi-Fi setting and select “MusicFlow_Setup” to connect. 10. Then select [Next] on the screen. 2 Connecting 11. Then select [Next] on the screen. ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 9. If you have a password for your network, the security screen appears on your smart device. Enter your password. 12.
Connecting 33 Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yy The wireless network operate at 2.
Connecting Connecting the speakers to your Home Network (Additional) 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 26. 2. On your smart device, select the Music Flow Player app. Tap the [Home] menu. You can enjoy the music with multiple speakers and single smart device you have. 2 Requirements Connecting yy Wireless router yy Smart device (Android or iOS) yy Another speaker ,,Note Signal interference may lead to stop playback.
Connecting 35 4. Plug in the desired device, and tap [Next]. 7. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 Connecting 5. Select the product you want to connect and tap [Next] on the screen. 8. Then select [Next] on the screen. 6. Select [Wired connection] on the screen. 9. Select [Finish] to complete the connection.
Connecting Connecting the additional speaker to your network via the Wi-Fi Setup Method Connection overview 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 28. 2. On your smart device, select the Music Flow Player app. Tap the [Home] menu. Broadband service 2 Connecting Router LAN cable 3. Select the [Add Speaker] on the side menu.
Connecting 37 4. Select the product you want to connect and tap [Next] on the screen. 7. Then select the [Next] on the screen. 2 Connecting 5. Select [Wireless connection] on the screen. 6. Press the ADD button on the rear of the speaker (Add). Then Network status LED blinks red. 8. Select [Finish] to complete the connection. ,,Note Speakers may be not connected if the distance between the Sound Bar (Main) connected by LAN cable and the speaker (Add) to be connected is too far.
Connecting Using the Bridge 3. Select the [Bridge] and tap [Next] on the screen. Use as a root device (wired to the home router) 2 When your home router is located too far from any speaker location that is to be connected via wired mode, connect the Bridge (R1) to your home router with LAN cable. Connecting b 4. Select [Wired connection] on the screen. a Bridge (R1) 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. 2.
Connecting 39 6. Select [Finish] to complete the connection. Use as a wireless extender When you want to expand MUSICflow mesh network coverage, add the Bridge (R1) to your home network. b a 7. Connect the speaker to Music Flow R1. Refer to the “Connecting the speakers to your Home Network (Additional)” on page 34. If you want to use this connection, Initial MUSICflow product is connected to your home router with LAN cable. 1.
Connecting 3. Select the [Add Speaker] on the side menu. 5. Then select the [Next] on the screen. 2 Connecting ,,Note You can also add another speaker as below. 4. Select the Bridge and tap [Next] on the screen. 6. Select [Finish] to complete the connection.
Operating 41 Enjoying the Music with Music Flow Player app Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. 3 1.
Operating Edit the Online streaming Service list Overview of the side menu 1. Launch Music Flow Player app on your smart device. The [Home] appears. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [EDIT] menu. 2. Tap the [Home] menu. 3 Operating 3. Side menu appears. yy Select the checkbox of the Online service you want to see on Home. yy Drag upwards or downwards to change the order of the Online service. yy Tap the , add the online services.
Operating 43 Playing a song 5. Select the desired song. Then selected song is displayed and played. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [Home] menu. ,,Note 4. Select the desired album. 3 Operating 3. Side menu appears. Select the [My Phone] on the side menu. If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker.
Operating Managing a playlist Overview of Playback On an album screen, tap the [ ] of the desired song. The pull down menu appears. You can confirm and adjust various information on the playback screen. 3 Operating a Displays the speaker that music plays through. Displays current playing music. b - Repeats the desired contents. Every time you click it, the state changed in the (Repeat One) (Repeat All) (Repeat Off) order. - Shuffles the music on the list. Music will be played in random order.
Operating 45 Selecting Sound effect Sound Effect Description This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. ASC The displayed items for the equalizer may be different depending on sound sources and effects. Analyzes the property of input sound and provides the sound optimized for the content in real time. Standard You can enjoy optimized sound. 1.
Operating Different ways of listening to music There are a number of differing ways of listening to music : Group, Surround and Seamless playbacks. ,,Note 3 Group Playback You can group multiple speakers linked to the Music Flow Player app and play the same music through all the connected speakers in the same group. 1. Select [Connected Speakers] on the side menu of Music Flow Player app.
Operating 47 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. Home Cinema Mode (Surround Sound Mode) Simply add a LG MUSICflow sound bar to your network and synchronize it with your LG MUSICflow speakers to enjoy a home cinema system experience. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback. 2. Connected speakers appear. Select the [ ] on the speaker.
Operating 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. ,,Note yy It is recommended to set the surround speakers to same models. yy The weak signal because of the long distance between speakers or wireless router and signal interference may cause abnormal playback. yy Depending on your wireless environment, the grouping may be broken.
Operating 49 Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker ,,Note yy It is not supported when you go out of the house with your smart device. yy Wi-Fi function on smart device must be turned on. yy If the source is Portable In and Bluetooth, seamless play is not supported. (Media server and online streaming service are supported).
Operating Using LG HomeChat ,,Note yy For more information, see http://homechat.lge.com. yy Depending on the region, the LG HomeChat service may not be available. About LG HomeChat 3 yy What kind of service is LG HomeChat? -- LG HomeChat service enables users to chat with Smart home appliances in friendly, daily language through mobile messenger LINE. Operating yy What kind of audio functions does LG HomeChat provide? How to start LG HomeChat Step 1.
Operating 51 Step 4. Connect audio to LG HomeChat 1. To control your home appliance(s) through HomeChat, you need to make sure that the smart device installed Music Flow Player and the speaker are connected to the same Wi-Fi network and first register your speaker. Enter “Register” for a link for product registration. Usage Examples Audio quick button If you haven’t installed Music Flow Player app already, refer to Installing “Music Flow Player” App on page 21. 2.
Operating Mood station Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version.
Operating 53 e Account Management – Manages social networking service and streaming services. [Speakers] Menu You can adjust speakers connected to your network. f Time zone - Sets time zone. g Advanced settings – Displays the Advance settings menu. (Page 55) h Google Cast - Displays the Google cast menu. i Version Info. – Updates the speaker to the latest version. j Open source licenses – Shows LGE Open Source Software Notice. [General] Menu Sets for easier use of the speaker.
Operating a Rename – Renames the speaker. b Speaker LED – Turns on or off speaker’s LED indicator. (LED Indicator is [ON] by default.) c IP Info. - Shows the IP address of the speaker. d DRC – Turns on or off DRC function. (Page 60) Night – Turns on or off Night Mode function. e (Page 62) 3 f Auto Volume On/Off – Turns on or off Auto Volume function. (Page 62) g AV Sync – Adjust the audio and video Synchronization. (Page 60) Woofer level – Adjust Woofer level.
Operating 55 [Music Library] Menu [Advanced Settings] Menu Manages the music library index. Mesh Network Channel Sync Schedule You can set the time to update the Music index automatically. Select the days and time to perform the update. (Sync Schedule is [OFF] by default.) If normal playback or group playback is not smooth using multiple speakers including wireless speaker connection, changed the mesh network channel to improve network speed. Sync 1.
Operating ,,Note yy The speaker is disconnected temporarily during the channel changing. yy If you changed the channel when the speaker turned off, turn on and add it again. yy If the speaker is not connected to network after changing the channel, add the speaker again. Mesh Network direct connection You can directly connect the smart device to speaker connected your home network.
Operating 57 Sensitivity Settings [Google Cast] Menu Sets the operating distance of Auto Music Play between the speaker and your smart device to adjust sensitivity of Bluetooth(BLE). Learn how to cast Shows to use Google Cast. Google Cast-enabled apps Shows available apps on Google Cast. Legal information Select [Google Terms of Service], [Google Privacy Policy] or [Open source license] to show the selected information. [Version Info.] Menu 3 Updates the speaker to the latest version.
Operating 2. Starts the software update. Using a Bluetooth Wireless Technology About Bluetooth Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. 3 [Open source licenses] Menu Operating Shows LGE Open Source Software Notice. Connecting individual devices under Bluetooth wireless technology does not incur any charges.
Operating 59 1. Select the Bluetooth function by using F on the remote control or F on the unit until the function is selected. Appears “BT” and then “BT READY” in display window. 2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device. Your speaker appears as “LG SH7(XX:XX)”. 3. Select the “LG SH7(XX:XX)”.
Operating Other operations DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [DRC ON] by using DRC. AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 3 1. Press AV SYNC. Operating 2. Use C/V to control the time which you can set at between 0 and 300 ms. Turn off the sound temporarily Press (Mute) to mute your unit.
Operating 61 Using your TV remote control AUTO POWER On/Off You can control some functions of this unit by your TV remote control even by other company’s product. Controllable functions are volume up/down and mute. This unit automatically turns on and off by an input source : Optical. Press and hold AV SYNC on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control. To check the status of this function, press and hold AV SYNC.
Operating Auto Display Off / Dimmer Press and hold AUTO POWER on the remote control for about 3 seconds, “ON - AUTO DISPLAY” appears and Auto Display off function is turned on. (Default: ON) OPT, HDMI, LG TV, ARC: If there is no key input for about 15 seconds, display will be darkened and after about 5 seconds, display will be turned off. Wi-Fi, PORTABLE, BT: If there is no key input for about 15 seconds, display will be darkened.
Operating 63 Standby mode Reset the Speaker The speaker switches to the standby mode if there is no music playback or no button operation. If the speaker is not turned on or doesn’t respond, reset the speaker. Standby mode Resetting the speaker Option 1. button until you hear the yy Press and hold the beep sound once. You can see “DISABLED” on the display window. Then all wireless network ports are deactivated and the stored wireless network information is deleted.
Troubleshooting Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. 4 The power does not turn on.
Troubleshooting 65 Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly.
Appendix 67 File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.m4a”, “.aac”, “.ogg”, “.wav” Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. yy Some wav files are not supported on this speaker. yy Depending on the types of file or ways of recording, it may not play back.
Appendix Specifications General (SH8) Power requirements 25 V 0 2 A (AC adapter) Refer to main label. Power consumption Networked standby : 5.8 W (If all network ports are activated.) AC adapter Model : DA-50F25 Manufacturer: Asian Power Devices Inc. Input: 100 - 240 V ~ 50 - 60 Hz Output: 25 V 0 2 A Dimensions (W x H x D) Approx. 1200 mm x 53 mm x 85 mm Net Weight Approx. 3.
Appendix 69 Wireless subwoofer (SPH7-W) Power requirements Refer to the main label on the subwoofer. Power consumption 33 W Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 200 W Max. Input Power 400 W Dimensions (W x H x D) Approx. 171 mm x 320 mm x 252 mm Net Weight Approx. 4.3 kg System LAN port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.11a/b/g/n Wi-Fi networks.
Appendix Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix 71 TERMS OF USE These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”). They set out LGE’s responsibilities to you as well as identifying the “dos” and “don’ts” that you should be aware of when you use the LG Software. LG Software is proprietary software owned by LG Electronics Inc.
Appendix services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability. We expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content, application or service made available through this LG Software.
Appendix 73 OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Appendix Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
