LCD TV OWNER’S MANUAL 32LG700H 37LG700H 42LG700H Installer Reference for Commercial Mode MPI/PPV Card Setup see page 19 Commercial Mode Setup see pages 85-105 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 2 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 7 Only use attachments/accessories specified by the manufacturer. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
11 Never touch this apparatus or antenna during a thunder or lighting storm. 12 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. 13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.
19 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 PREPARATION Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Back Panel Information . . . . . . . .
PARENTAL CONTROL / RATINGS Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FEATURES OF THIS TV USB IN SERVUCE ONLY HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing." Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. USB port shall be used for software update by service personnel only. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
PREPERATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. TV PO W ST GU IDE B ER DV PO RTA D L VC INFO R i RE EN TE R TU RN ME N U INP UT VO L CC AL PH A/N UM MUT 1 RE MO .
FRONT PANEL INFORMATION ■ Image shown may differ from your TV. Intelligent Sensor Stand VOL CHANNEL( Buttons , ) PREPARATION CH VOLUME (+, -) Buttons ENTER ENTER Button MENU Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the set is switched on.
PREPARATION BACK PANEL INFORMATION ■ Image shown may differ from your TV. USB SERVICE ONLY PREPARATION R R 12 VIDEO L/MONO AUDIO R 15 ANTENNA IN M.P.I.
1 3 4 5 6 7 LAN (SERVICE ONLY) Connect to control network. UPDATE Software downloads and debug mode enable/disable. RESET Hardware reset to PTC microcontroller. OPTICAL DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical connection. Note: In standby mode, these ports do not work. 8 REMOTE CONTROL OUT IR output for controlling an auxiliary device. 9 RJP INTERFACE (REMOTE JACK PACK PORT) Connect to remote jack pack control output port.
PREPARATION STAND INSTRUCTION ■ Image shown may differ from your TV. INSTALLATION DETACHMENT PREPARATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Remove the four screws that hold the base on. 3 Detach the stand from TV.
CABLE MANAGEMENT ■ Image shown may differ from your TV. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the CABLE HOLDER for power code(only 32LG700H model) and PROTECTIVE BRACKET/Screw. It will help prevent the power cable from being removed by accident. CABLE HOLDER (only 32LG700H model) PROTECTIVE BRACKET (This feature is not available for all models.) 2 Install the CABLE MANAGEMENT CLIP as shown.
PREPARATION DESKTOP PEDESTAL INSTALLATION ■ Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides. PREPARATION 4 inches 4 inches 4 inches CAUTION 4 inches G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source. SWIVEL STAND The TV can be conveniently swivelled on its stand 90° to the left or right to provide the optimum viewing angle.
ATTACHING THE TV TO A DESK The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only the included screw. PREPARATION Stand 1-Screw (provided as parts of the product) Desk WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
PREPARATION VESA WALL MOUNTING PREPARATION Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall.
SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND ■ We recommend that you set the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. ■ PREPARATION You should purchase necessary components to prevent TV from falling off of the stand.
PREPARATION ■ To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the direction if needed. Wall Antenna Socket Outdoor Antenna (VHF, UHF) R PREPARATION 1. Antenna (Analog or Digital) Multi-family Dwellings/Apartments (Connect to wall antenna socket) ANTENNA IN M.P.I.
MPI CARD SLOT / PPV CARD INSTALLATION The MPI card is equipped with an RF jack for antenna/cable signal source connection. The MPI card slot is also available for installing a PPV (Pay-Per-View) card. 1. Remove the two MPI card retainer screws. 2. Pull out current MPI card far enough so that the RF cable can be detached from the old card. 3. Detach RF cable. 4. Place new PPV card into slot and slide it in far enough to reconnect RF cable. 5.
EXTERNAL EQUIPMENT SETUP ■ ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP PREPARATION This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. Component Connection 1.
HDMI Connection ( HDMI/DVI IN 1. How to connect Connect the digital set-top box to H D M I / D V I I N 1 ( D V I ) or 2 jack on the TV. 2 No separate audio connection is necessary. HDMI supports both audio and video. 1(DVI) RJP INTERFACE VID CO 2. How to use 1 ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select H D M I 1 or H D M I 2 input source with using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect RESET 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the TV. 2 1(DVI) AUDIO RGB(PC) (RGB/DVI) RJP INTERFACE 2. How to use AUDIO VIDEO COMPONENT IN 1 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) ■ Select the H D M I 1 input source on the TV using the I N P U T button on the remote control.
DVD SETUP Component Connection 1. How to connect 2 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L R Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. 1 2 LAN (SERVICE ONLY) 2. How to use ■ ■ ■ Turn on the DVD player, insert a DVD.
EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 2 No separate audio connection is necessary. HDMI supports both audio and video. HDMI/DVI IN 2 1(DVI) RJP INTERFACE VIDEO 2. How to use ■ ■ COM 1 Select the HDMI 1 or HDMI 2 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
VCR SETUP ■ To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Antenna Connection 1. How to connect 2 Connect the antenna cable to the RF antenna in socket of the VCR. ANTENNA IN M.P.I. 1 S-VIDEO VIDEO L ANT OUT R ANT IN OUTPUT SWITCH Wall Jack 2 2. How to use ■ ■ Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect ■ ■ Select the A V 2 input source on the TV using the I N P U T button on the remote control. If connected to A V I N 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. VIDEO 1 AV IN 2 26 L USB SERVICE ONLY EXTERNAL EQUIPMENT SETUP 2. How to use ■ Video Game Set V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors.
PC SETUP VGA (D-Sub 15 pin) Connection RGB(PC) AUDIO (RGB/DVI) 1. How to connect Connect the VGA output of the PC to the R G B ( P C) jack on the TV. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the TV. AUDIO VIDEO COMPONENT IN 1 2 2. How to use ■ ■ Turn on the PC and the TV. Select the R G B - P C input source on the TV using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect LAN (SERVICE ONLY) HDMI/DVI IN Connect the DVI output of the PC to the H D M I / D V I I N 1 ( D V I ) jack on the TV. RESET 2 RGB IN EXTERNAL EQUIPMENT SETUP 1 1(DVI) 2 Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the TV. VIDEO Turn on the PC and the TV. Select the HDMI 1 input source on the TV using the I N P U T button on the remote control. DVI-PC OUTPUT 28 AUDIO COMPONENT IN 2 2.
Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P o s i t i o n, P h a s e, and S i z e can also be adjusted. Move Screen Enter Move MENU Prev. E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Resolution Auto config. Position R G • Advanced Control • Reset Screen (RGB-PC) Size Phase Reset G 1024 x 768 1280 x 768 1360 x 768 EXTERNAL EQUIPMENT SETUP PICTURE 1 MENU Select P I C T U R E.
EXTERNAL EQUIPMENT SETUP Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. EXTERNAL EQUIPMENT SETUP PICTURE Move Screen Enter Move MENU Prev. E Resolution • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 Auto config. G Position R G Size Auto Config.
Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. Move Screen Enter E • Contrast 50 • Brightness 50 • Sharpness 50 • Color 50 Move MENU Prev. Resolution Auto config.
EXTERNAL EQUIPMENT SETUP Screen Reset (Reset to original factory values) Returns P o s i t i o n, S i z e, and P h a s e to the default factory settings. This feature operates only in RGB-PC mode. EXTERNAL EQUIPMENT SETUP Screen PICTURE Move E 50 • Brightness 50 • Sharpness 50 • Color 50 0 Auto config. Position R • Reset Screen (RGB-PC) 1 MENU Select P I C T U R E. ENTER Select S c r e e n ( R G B - P C ). ENTER Select R e s e t. 3 4 ENTER 5 ENTER 32 G Initialize Settings.
AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. Digital 1. How to connect Connect one end of the optical or coaxial cable to the TV’s O P T I C A L port of D I G ITAL AUDIO OUT. UPDATE 2 Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. 3 Set the “TV Speaker option - Off” in the AUDIO menu. (G p .63). See the external audio equipment instruction manual for operation.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV POWER VCR STB TV/STB/DVD/VCR Select the remote’s operating mode: TV, STB, DVD, or VCR. GUIDE DVD PORTAL INFO i WATCHING TV / CHANNEL CONTROL GUIDE Displays and removes electronic channel guide. PORTAL Displays and removes hotel interactive menu.
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference. (Up/Down/Left Right/ENTER) RETURN Clears all on-screen displays and returns to TV viewing from any menu. INPUT External input modes rotate in regular sequence: TV, AV1-2, Component, RGB-PC, HDMI1 and HDMI2. VOLUME UP Increase/decrease the sound level. /DOWN CC Select a closed caption. G p.68 MUTE Switch the sound on or off. G p.36 WATCHING TV / CHANNEL CONTROL MENU Displays the main menu.
WATCHING TV / CHANNEL CONTROL TURNING ON TV WATCHING TV / CHANNEL CONTROL 1 First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the button on the TV or press the P O W E R button on the remote control. 2 Select the viewing source by using the INPUT button on the remote control. ■ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes.
Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL Move Enter CHANNEL Move Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Data Broadcasting Data Broadcasting Enter DIGITAL F G Select channel type and RF-channel number. Channel F 2 G DIGITAL 2-1 Bad Normal Good Delete Close 1 MENU Select C H A N N E L.
WATCHING TV / CHANNEL CONTROL Channel Editing The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the topright corner of the screen. WATCHING TV / CHANNEL CONTROL CHANNEL Move Enter Auto Tuning Manual Tuning Channel Edit Channel Label Data Broadcasting Add/Delete 1 MENU 2 Select C H A N N E L.
CHANNEL LABEL Choose preset labels for your channels. If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel even if you didn't preset a label for the channel. CHANNEL Move Enter CHANNEL Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit Channel Label Channel Label Data Broadcasting Data Broadcasting Move Enter DIGITAL 2-1 Channel Logo F Disney Close 1 MENU Select C H A N N E L.
WATCHING TV / CHANNEL CONTROL INPUT LIST TV AV1 AV2 Component WATCHING TV / CHANNEL CONTROL 1 INPUT Select the desired input source. ENTER TV HDMI2 AV1 HDMI1 AV2 RGB-PC Component ■ ■ ■ ■ ■ 42 RGB-PC T V: Select it to watch over-the-air, cable and digital cable broadcasts. A V 1 - 2: Select them to watch a VCR or other external equipment. C o m p o n e n t : Select them to watch DVD or a Digital set-top box. R G B - P C: Select it to view PC input.
EXAMPLE ELECTRONIC PROGRAM GUIDE This is an example of a typical TV electronic program guide showing available programming. CHANNEL INDICATOR Currently tuned channel and program. PROGRAMMING GRID Program listings arranged in time slots. TV PROGRAM Current program on selected channel. DATE/TIME OSD Shows current Date/Time. K&M Kids Movies Channel 01:30 AM Mon.
PICTURE CONTROL PIP (PICTURE-IN-PICTURE) PIP enables the end user to view two sources on the screen at the same time. The end user can switch between the Main and Sub picture sizes. ■ Note: Actual size of Main screen and PIP inset may be different than shown above. PICTURE CONTROL PIP Turns PIP mode on and off. 7 PQRS 8 TUV 0&@ PIP CH+ Selects next higher channel for PIP window. PIP CHSelects next lower channel for PIP window. 44 PIP Operation 1.
■ ■ Press PIP on remote to place PIP screen inset on the TV screen. See above. 1. With PIP active, press Swap to switch the PIP inset with the TV picture. See above. Once the PIP inset shows the TV tuner picture, you can select TV channels with PIP Ch+ for channel up and PIP Ch- for channel down. 2. Press PIP Input to choose from available Aux sources that can be used for the PIP inset. Note: Not all Aux sources can be used with PIP function.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. ■ RGB-PC input source use 4:3 or 16:9 aspect ratio. 16:9 PICTURE CONTROL 1 RATIO 2 RETURN Press the R A T I O button repeatedly to select the picture options : S e t B y P r o g r a m , 4 : 3 , 1 6 : 9 , Z o o m 1 , Z o o m 2 , J u s t S c a n. Return to TV viewing. ■ 46 You can also adjust A s p e c t R a t i o in the PICTURE menu.
Set by program 16:9 Selects the proper picture proportion to match the source’s image. Adjust the picture horizontally, in a linear proportion to fill the entire screen. (4:3 16:9) PICTURE CONTROL (16:9 4:3) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio.
PICTURE CONTROL PICTURE CONTROL 48 Zoom 1 Just Scan Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated.
PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually.
PICTURE CONTROL Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue.
MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. P i c t u r e M o d e - I n t e l l i g e n t S e n s o r”. This feature is disable in “P PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard (User) 50 • Sharpness 60 • Color 60 • Tint 0 • Back Light 80 E R G E 1 MENU E • Brightness E 90 Enter PICTURE CONTROL 90 • Contrast E • Back Light Select P I C T U R E.
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images.
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode.
PICTURE CONTROL ADVANCED CONTROL - EYE CARE Dims extremely bright pictures. P i c t u r e M o d e - V i v i d, C i n e m a”.
ADVANCED CONTROL - FILM MODE Set up the TV for the best picture appearance for viewing movies. When you operate Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV, Digital DTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode.
PICTURE CONTROL PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter PICTURE Move E E • Contrast 50 • Contrast 50 • Brightness 50 • Brightness 50 • Sharpness 50 • Sharpness 50 • Color 50 • Tint 0 i R G • Advanced Control PICTURE CONTROL Screen (RGB-PC) Select P I C T U R E. 2 ENTER Select R e s e t. 3 ENTER Initialize the adjusted value. MENU Return to TV viewing. 56 • Color 50 Resetting video configuration...
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 L : Standard L • SRS TruSurround XT: Off 50 • Treble 50 • Bass 50 • Bass 50 Select A U D I O. Select A u t o V o l u m e. Select O n or O f f.
SOUND &LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable.
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Balance Sound Mode 0 Enter L R : Standard Clear Voice : On Balance 0 Enter L R : Standard 50 • Treble 50 Treble 50 • Bass 50 • Bass 50 Bass 50 Select S o u n d M o d e. ENTER Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. ENTER Select T r e b l e or B a s s. ENTER Make appropriate adjustments.
SOUND &LANGUAGE CONTROL SRS TRUSURROUND XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Move Auto Volume : Off Clear Voice : On Balance 0 Sound Mode AUDIO Enter L : Standard R : Off Clear Voice : On Sound Mode • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 • Reset E Select A U D I O. Select C l e a r V o i c e. ■ 3 ENTER 4 RETURN R Select O n or O f f.
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Auto Volume : Off Clear Voice : On Sound Mode 0 L R : Standard : On Balance 0 L : Balance 0R : Standard • SRS TruSurround XT: Off Close 50 • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL Select A U D I O. Select B a l a n c e. ENTER Make appropriate adjustments. 3 Return to the previous menu. MENU Return to TV viewing.
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO Move Enter AUDIO Move E : On Balance Sound Mode E Clear Voice Clear Voice 0 L : Standard R : On Balance Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Treble 50 • Bass 50 • Bass 50 : On R : Standard • SRS TruSurround XT: Off • Reset TV Speaker Enter • Reset TV Speaker : On Off On 2 Select A U D I O. ENTER Select T V S p e a k e r. ENTER Select O n or O f f.
SOUND &LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Move : Off Auto Volume : Off Clear Voice : On Clear Voice : On Sound Mode 0 Sound Mode 0 L • SRS TruSurround XT: Off • Treble 50 • Bass 50 • Bass 50 SOUND & LANGUAGE CONTROL Select A U D I O. Select R e s e t. Initialize the adjusted value. 4 MENU R : Standard i Resetting audio configuration... 50 Return to TV viewing.
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. MONO SAP SAP Each time you press the S A P button, M o n o, S t e r e o, or S A P appear in turn. 2 RETURN Return to TV viewing. ■ If other languages available on the digital signal, select them with the S A P button.
SOUND &LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV mode. OPTION Move Enter OPTION Move Enter Language : English Language : English Caption : Off Caption : Off English Menu Audio F English Close SOUND & LANGUAGE CONTROL 1 MENU 2 Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select A u d i o.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter OPTION Move Enter Language : English Language : English Caption : Off Caption : Off Menu Audio F English G English Close 2 Select O P T I O N. ENTER Select L a n g u a g e. ENTER Select M e n u. 3 4 SOUND & LANGUAGE CONTROL 1 MENU Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
SOUND &LANGUAGE CONTROL CAPTION MODE Caption must be provided to help people with hearing loss watch TV. This feature operates only in TV, AV1-2 mode. 1 CC ■ Select Caption O n or O f f. ALPHA/NUM When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying captioning information if provided on a program.
Digital Broadcasting System Captions Choose the language you want the DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Language : English Language : English Caption : Off Caption : Service1 Enter F Mode On G Service1 Digital Option Close 2 Select O P T I O N. ENTER Select C a p t i o n. ENTER Select O n.
SOUND &LANGUAGE CONTROL Caption Option Customize the DTV captions that appear on your screen. This function in only available when Caption Mode is set On.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME Move Enter TIME Move Enter Manual Clock : Feb/21/2008/ 2:10 AM Clock F : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off Year On Time : Off On Time : Off Month 2 Date 21 Hour 2 AM Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : Off Minute 10 Eastern Time Zone Daylight Saving Auto Close TIME SETTING 1 MENU 2 Select T I M E. ENTER Select C l o c k.
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work.
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 10min 1 TIME SETTING TIMER Press the T I M E R button repeatedly to select the number of minutes. Sleep timer options: Off, 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2 RETURN Return to TV viewing. ■ You can also adjust S l e e p T i m e r in the T I M E menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 15 minutes. TIME Move TIME Move Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off On Time : Off On Time : Off Enter Sleep Timer : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep : On Enter Off On TV will be automatically turned off, in case of No Signal for 15 minutes. 2 Select T I M E. ENTER Select A u t o S l e e p. ENTER Select O n or O f f.
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1.
Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Lock System 1 MENU 1 2 ABC 3 DEF 5 JKL 6 MNO PQRS 8 TUV 9 0 &@ 7 Move Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block ENTER GHI .:/, 4 : Off LOCK Enter Off On Select L O C K.
PARENTAL CONTROL /RATINGS Set Password Change the password by inputting a new password twice. LOCK Move Lock System 1 MENU PARENTAL CONTROL / RATING 2 1 2 ABC 3 DEF 5 JKL 6 MNO PQRS 8 TUV 9 0 &@ 7 Lock System Set Password Block Channel Block Channel TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General Downloadable Rating Downloadable Rating Input Block Input Block Select L O C K. Input the password. Select S e t p a s s w o r d.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Lock System Enter : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 1 3 DEF GHI 5 JKL 6 MNO PQRS 8 TUV 9 0 &@ .:/, 4 7 2 ABC Input the password. Select B l o c k C h a n n e l. 4 ENTER Move CH Move Page MENU Previous Exit Select L O C K.
PARENTAL CONTROL /RATINGS MOVIE & TV RATING Movie Rating (MPAA) Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Lock System 1 MENU PARENTAL CONTROL / RATING 2 1 3 DEF GHI 5 JKL 6 MNO 8 TUV 9 0 &@ .
TV Rating Children Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
PARENTAL CONTROL /RATINGS TV Rating General Based on the ratings, blocks certain TV programs that you and your family do not want to view.
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data.
PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input.
COMMERCIAL MODE SETUP INTERACTIVE TV SETUP Set up the TV for Gem PPV or Gem Operation without a PPV card Channel Guide Hotel Information Help Exit POWER TV STB DVD VCR PORTAL GUIDE PPV GEM-TV Setup 1. Make all connections as required of PPV system. 2. Set TV to default condition. 3. Configure all relevant installer menu items and TV features. 4. Install PPV card. In most cases the PPV card is preprogrammed with the PPV provider master TV setup.
COMMERCIAL MODE SETUP INSTALLER OVERVIEW This is the commercial mode setup guide only. GEM PTC INSTALLER MENU Operating Installer Menu To set up the controls for the TV you will need to know how to enter the TV Installer menu and make changes to the default values as required. If necessary, familiarize yourself with the TV Installer menu and how to make and save changes in the menu. 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.
INTERACTIVE TV OVERVIEW Channel Guide Hotel Information Help Exit Through the interactive TV, the lodging guest is offered a more complete venue of lodge services and amenities. Using the TV in the comfort of the hotel room, the guest can browse the lodge resources available and make selections quickly. Charges for these offerings are billed at the time of reservation. The Gem TV is connected to the lodge’s billing computer.
COMMERCIAL MODE SETUP COMMERCIAL MODE SETUP FOR MASTER TV This page provides an overview of a Master TV configuration. N o t e 1: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel search) is disabled if there is an Aux input active. Commercial Mode Setup Procedure 1. Set Installer Menu Items (Enter TV Installer Menu, see Installer menus for detailed instructions.) a. Set Installer menu item 1 1 7 F A C T D E F A U L T, to 0 0 1 and press E N T E R on Installer remote.
MASTER TV PROFILE SETUP LEARNING/TEACHING WITH USB MEMORY CARD On Master TV, Create Profile and Learn 1. Set up all Master TV features on the menus and do a Channel Search. Add Channel and Aux Labels etc. Tune in an analog channel. 2. Plug USB memory card into the USB In port on Master TV. 3. Press Menu key to open Main menu. Highlight the Option icon. 4. Press the Left arrow key once, the Option icon on left side of menu will be highlighted. 5. Press number key ‘7’ a total of 7 times. 6.
COMMERCIAL MODE SETUP On Target TV, Teach Master TV Profile 1. Plug USB memory card with Master TV Profile setup into Target TV USB input port. 2. Press Menu key to open Main menu and then highlight the Option Menu icon. 3. Press the Left arrow key once, this will highlight the Option icon on left side of menu. 4. Press number key ‘7’, a total of 7 times. 5. Using the Up/Down arrow key, select ‘Teach to TV’, then press Enter key. 6. Use Up/Down arrow keys to navigate through profiles.
TLL-1100A CLONING CONNECTIONS/LEARNING SETUP Connections for the TLL-1100A Clone Programmer to Learn the TV Master TV Setup On Master TV Set up all Master TV features on the menus and do a Channel Search. Add Channel and Aux labels etc. See previous page. Insert MPI cable into TV MPI port. On TLL-1100A 1. Turn On the TLL-1100A. 2. Use the Mode button to select Clone Mode. 3. Use the Left/Right arrow to select the CBank (1 - 8) to store the master setup in. 4.
COMMERCIAL MODE SETUP LT2002 CLONING CONNECTIONS/LEARNING SETUP Connections for the LT2002 Clone Programmer to Learn the TV Master TV Setup Antenna or CATV Ferrite Core (TDK, ZCAT 2035-0930) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI Color • green • red Reset battery ok battery low Blink pattern • slow power on no communications • heartbeat power on communications ok THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION THE SW IS REVISION
LT2002 CLONING LEARNING SETUP Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master TV Setup Use MPI Cable to Connect LT2002 Clone Programmer to Master TV MPI Port If there is a good connection, “THE CLONE HAS CONTROL OF TV” message will appear. Press any key on the Installer remote. Learn Setup from Master TV Press 1 to select the “LEARN FROM TV” option, then press ON/OFF, POWER, or ENTER to go to the Memory Bank Selection Menu.
COMMERCIAL MODE SETUP CLONING CONNECTIONS/TEACHING SETUP Teaching the Master Setup to Another TV Connections for the LT2002 to Teach another TV the Master Setup Antenna or CATV Ferrite Core (TDK, ZCAT 2035-0930) Connect cable to TV MPI Jack and follow on screen instructions Status Indicator MPI Reset Color • green • red battery ok battery low Blink pattern • slow • heartbeat power on no communications power on communications ok THE CLONE HAS CONTROL OF THE TV THE CLONE IS VERSION THE TV IS VERSION
INSTALLER MENU Use the Installer’s Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote control. Just press MENU repeatedly until the TV seems to stop responding, then press 9, 8, 7, 6, then ENTER to access the Installer’s menu. To remove the Installer’s menu, press ENTER again.
COMMERCIAL MODE SETUP Installer Menu Items 035 through 120 Menu Item Function Value Range Default Value COMMERCIAL MODE SETUP 035 038 039 COMPPORT EN. YPrPb EN. REAR AUX EN 0/1 0/1 0/1 1 1 1 Note 1. Set to 0 to disable HDMI 1. Set to 1 to enable HDMI 1. Set to 1 to enable display panel Component Video 1 input jacks. Set to 1 to enable display panel Video 1 input jack. 040 AUTO CAMPORT 0/1 1 046 STRT AUX SRCE 1 ~ 6, 255 6 Set to 1 to automatically switch to Camport.
Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The POWER MANAGE function is for saving energy. If set to 0, Power Manage is Off. Settings range from 0 ~ 7, with 1 ~ 7 representing the hours that the unit will remain On, unless there has been activity from either the control panel or remote control.
COMMERCIAL MODE SETUP 009 - MAX VOLUME (Maximum Volume) This function determines the maximum volume level allowable with the VOLUME (VOL) Up/Down controls. In this way, for example, someone can not set the volume level high enough to disturb others. The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow keys. It may be best to set the same value on every TV.
040 - AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment is connected to front Video input. Set to 0 to disable front Video automatic source selection. NOTE: If set to 1, 093 RJP Available is automatically set to 0. 046 - STRT AUX SRCE (Start Aux Source) Sets the starting AUX source. At power up, TV will tune to starting Aux source if item 004 Start Channel is set to 0.
COMMERCIAL MODE SETUP 087 - REAR RGB EN. (Rear RGB Enable) Controls access to rear RGB input on TV. Set to 0 to disable RGB input. Set to 2 for PC for STB RGB input. Set to 18 for Auto Configure one time only with power cord removal and reinsertion. 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC. 088 - EN NOISE MUTE (Enable Noise Mute) If set to 1, audio mutes if no signal is present. 104 - START MINOR CHANNEL Sets XX-XX minor start channel number at power up: 0=NTSC.
REFERENCE: DETAILED INSTRUCTIONS FOR MAKING A MASTER TV IMPORTANT INSTALLER SETUP INFORMATION! PLEASE READ THE FOLLOWING... To set up a master TV you will need to know how to enter the TV Installer menu and make changes to the default values as required. If necessary, familiarize yourself with the TV Installer menu and how to make and save changes in the menu, before attempting to clone the TV Master TV setup.
COMMERCIAL MODE SETUP REFERENCE: PROCEDURES FOR ADDING CHANNEL LABEL ICONS/CUSTOM CHANNEL LABELS (2-5-4 + MENU MODE) Adding Channel Icons and Labels in the 2-5-4 + Menu Mode Editing/Adding Channel ICONs and/or Labels If there is no pre-assigned ICON, you can make a custom channel label of up to 7 characters to help in identifying the channel or network. At your option, channel labels can also be added in addition to a preassigned ICON.
REFERENCE: CLONABLE MENU FEATURES Clonable Menu Features Menu /Sub Menu Features Audio Contd.
COMMERCIAL MODE SETUP REFERENCE: POWER SAVING SETUP Power Savings Setup Installer Item 118 Power Saving: set to 001, enabled (Default). Installer Item 099 Backlighting: value set as shown below. (Default value is 200) Item 099 Backlighting (Static) 100 90 80 70 60 50 40 30 20 10 1 Picture Lumin.
TV CAMPORT AUTO SENSE OPERATION The CAMPORT Auto Sense function is enabled when: 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1). Selectable= Can be accessed with INPUT key, direct access, etc. Auto Sense= Switches to this input when connector is inserted. The camport (Side Video) has the highest priority and will override any commands including tuning to the Start Channel.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press the MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK but No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. ■ Check HDMI cable over version 1.3.
APPENDIX REFERENCE: LT2002 CLONING PROCEDURE TROUBLESHOOTING Warning: Do not use LT2002 while any PPV card is installed in TV or clone programmer will be damaged. Reset Clone After Static Shock After replacing exhausted batteries, or if the programmer behaves strangely after a static shock, use a paper clip or similar instrument inserted through the small hole marked ”RESET” to activate the internal reset switch and restore normal operation. After a reset, check the real-time clock setting.
TROUBLESHOOTING FLOW CHART Controller Quick Check Is 'STATUS' LED on Analog Board Blinking ? No Yes Is TV Connected to AC Power ? No Plug into AC Power Outlet Press 'POWER' or 'ON/OFF' key on TV Yes Bad TV Did TV Turn On ? No 1. Bad TV Yes Is Red LED on TV Lit ? No Press 'POWER' or 'ON/OFF' or 'VOLUME UP/DOWN' or 'MUTE' key on Installer Remote 1. Bad Analog Board. 2. Bad Digital Board. Yes Did TV Respond ? Cycle the power by removing and re-connecting the AC power cord.
APPENDIX COMMERCIAL MODE CHECK Press the "On/Off" key on the front panel. The On/Off key is always operational. Did you get a response ? No Bad TV Yes Leave the TV set On Go to Installer menu by pressing "MENU" until the TV stops responding. Did TV stop responding or continue to respond ? Stopped responding Continued to respond APPENDIX 110 TV is not in Commercial Mode Call Technical Support for Assistance TV is in Commercial Mode.
GLOSSARY OF TERMS A list of definitions for some of the words found in this guide 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider. The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the Antenna/Cable threaded jack on the back of the TV. 300 TO 75 OHM ADAPTER A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a STB and press the corresponding mode button (such as a S T B) on the remote control, while pointing at the component.
APPENDIX Remote Control Code VCR Brand AIWA AKAI APPENDIX 114 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Bran
HDSTB Brand Codes ALPHASTAR DSR 123 AMPLICA 050 ASTRO PHILIPS(ML) 159 ASTROTHOMPSON(ML)160 ASTRO NOKIA(ML) 161 BIRDVIEW 051 CHANNEL MASTER 013 036 CHAPARRAL 008 CITOH 054 CURTIS MATHES 050 DRAKE 005 011 141 DX ANTENNA 024 ECHOSTAR 038 093 097 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 HOUSTON TRACKER 033 057 Brand 126 129 014 015 018 055 009 012 077 145 006 007 010 052 112 116 046 040 094 098 056 057 095 099 076 058 096 100 021 134 004 059 140 037 104 02
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note 08 POWER Remote control Button (Power On/Off) D6 0F TV Remote control Button 0B INPUT Remote control Button 0A SAP Remote control Button 79 FF RATIO Remote control Button AB GUIDE Remote control Button OC PORTAL Remote control Button AA INFO Remote control Button 10-19 Number Key 0-9 Remote control Button 4C - (Dash) Remote control Button 1A FLASHBK Remote control Button 02 VOL + Remote control Button 03 VOL - Remote control Button 00 CH
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license.
APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program.
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library.
APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices.
For an executable, the required form of the "work that uses the library" must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this.
MOZILLA PUBLIC LICENSE Version 1.1 --------------code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.Definitions. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.1. “Contributor” means each entity that creates or contributes to the creation of modifications. 1.2.
APPENDIX (c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license. (d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. APPENDIX 3.
3.5. 3.6. (c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Required notices. You must duplicate the notice in exhibit A in each file of the source code.
APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU.
11. MISCELLANEOUS. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions.
