Colour Television OWNER'S MANUAL Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached the back cover and quote this information to your dealer when you require service.
Contents Installation 3 Location and function of controls Remote control handset Battery installation Front panel 4 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function On screen language selection (option) 8 On 9 screen menus Menu selection Setting up TV stations 10 Auto programme tuning Manual programme tuning Programme edit Favourite programme Calling the programme table Picture adjustment PSM (Picture Status Memory) Picture adjustment / Eye (option)
Installation Power This set supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. operates on an AC mains Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not cause of the set, this may place anything containing liquid on top a fire or could give an electric shock.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset Before you use the remote control teries. See the next page. POWER MUTE 1 11 2 1 2 3 4 5 6 7 1. 2. 8 9 0 TV/AV 3. 12 SOUND MENU PICTURE 10 () PR 5.
Location and function of controls 13. I/II/* (option) selects the language selects the sound during dual language broadcast. (option) output. POWER 14. LIST displays 15. SLEEP sets the 16. SSM/* recalls 1 the programme table. sleep 11 timer. 17. SURROUND (º/*) (option) selects surround sound. 2 3 4 5 6 7 8 9 MENU/INDEX 0 TV/AV 3 18. VCR BUTTONS (option) control a LG video cassette recorder. 12 TV 4 13 I/II/ EYE/ (option) PIP switches the sub picture on or off.
Location and function of controls Front panel RF/RT-21FB25 series RF/RT-21FA35 series AV2 ON/OFF MENU VOL OK PR 7 MENU OK VOL PR ON/OFF L/MONO 2 R AUDIO 6 123 4 5 8 1345 2 RF/RT-17/21FB75 series VIDEOL/MN 67 RF/RT-15/21FB55/56 series VIDEO MENU OK VOL L AUDIO R PR ON/OFF AV 123 4 5 1 RF/RT-15/21FB95 series 234 6 5 8 7 RF/RT-21FB35 series 7 VIDEO AV ON/OFF MENU OK VOL PR L/MONO AUDIO R VIDEO AUDIO AV3 R AUDIO 6 L/MON 1234 VIDEO 5 8 RF/RT-21FB45 se
Location and function of controls Front panel RF/RT-17/21FB75 series 7 6 RAUDIO L/MON 123 4 RF/RT-21FD35 series VIDEO OK MAIN POWER (ON/OFF) switches the set on or off. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 3. REMOTE CONTROL SENSOR Note : Only use the supplied remote control handset. (When you use others, they'll be not able to function.) 4. MENU selects 5 AV2 MENU 1.
Basic operation On and off 1. 2. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on 3. fully. Press the POWER button The set reverts to 4. POWER 2 3 4 5 6 8 0 9 TV/AV the remote control handset. mode. standby Press the main power button MUTE 1 7 on again to switch the set off.
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Press the MENU button and then D / E button to display each menu. 2. 3. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu. 4. Change the setting of an item in the sub F/GorD/E.
Setting Station numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Up AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { TV stations up to 100 TV stations Note : In can be stored. tuning All stations that can be received are stored by this method.
Setting TV stations up Auto programme scan To automatically scan the pictures of stored programmes, press theD( DD ) or E( E ) button for about 3 seconds. The picture of stored programmes appears on the screen one by one. E To stop auto programme scanning, Manual programme Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { press any button except VCR buttons.
TV stations up Setting Station AutoOprogramme ManualOprogramme { { Assigning a station name 1. Repeat the 'Manual programme tuning' steps ProgrammeOedit FavouriteOprogramme { 2. Press the D / E button to select Name. 3. Press the G button 4. Press the D button. You { and the ()O}{O OKOMENU 2 3 4 5 6 7 8 9 0 TV/AV MENU SOUND can use a 6. your choice of the second Press the OK button. Repeatedly viewing. can In models, Booster is If the can menu.
TV stations up Setting Programme Station edit This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. 2. Press the MENU button and then D / E button to select the Station menu. Press the G button and then D / E button AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { ()O}{OOKOMENU select to Programme edit. 3.
Setting Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { TV stations up Favourite programme { { This function lets you select your favorite programmes directly. 1. Press the MENU button to select the Station 2. Press the G button and then D / E button to select Favourite ()O}{OOKOMENU menu. programme. 3. Press the G button to display the Favourite programme menu.
Setting TV stations up Calling the programme table You check the programmes stored in the memory the programme table. can programme table Press the LIST button to display the by displaying Displaying Programme The programme table appears on the screen. table contains ten programmes as below. table menu. One programme POWER MUTE Station OOOOCO01 OOO5OOSO69 O1OOCO03OOO6OOSO17 1 2 3 4 5 6 7 8 9 0 TV/AV O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 ()}{OOKOMENUOO Note : a.
Picture Picture PSM { Contrast { Brightness { Colour { Sharpness { adjustment PSM (Picture Status Memory) Press the MENU button and then D / E button to select the Picture menu. Press the G button to select PSM. 1. 2. Press the G button and then D / E button to select setting on the PSM pull-down menu. 3.
Picture adjustment Eye (option) Eye is an optional function. Only a set with eye option can perform this function. In automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the most suitable picture according to the surroundings. some models, the set will Press the EYE/* button to switch the eye function on or POWER off.
Sound Sound adjustment (option) Sound SSM { AVL { DBS { Balance { FMOTransmitter { adjustment is an optional function only adjustment can perform this function. SSM You 1. can select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of equalizer. Press the MENU button and then D / E button to select the Sound POWER MUTE 4 7 2 5 menu. 2. Press the G button to select SSM. 3.
Sound Sound You adjustment (option) Sound adjustment AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume level even if you change programmes. If you switch DBS to on, the set creates a dynamic bass sound. The Turbo sound creates an all around sound as in a concert hall. 1. 2. 3. 4. can adjust balance, Press the MENU button and then D / E button to select the Sound menu.
Sound adjustment (option) Sound output selection (option) In AV mode, you can select output sound for the left and right loud- speakers. press the I/II/* button to select the sound output. Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loud- Repeatedly L+R L+L : : R+R : speaker. Audio signal from audio L input is sent to left and right loudspeakers. Audio signal from audio R input is sent to left and right loud-speakers.
Time Setting 1. 2. 3. Setting Time the clock Press the MENU button and then D / E button to select the Time menu. Press the G button to select Clock. Press the G button and then D / E button to adjust the hour. Clock { OffOtime OnOtime { AutoOsleep { { Time Clock { Offotime Onotime { Autoosleep { -i-o:o-i- ()O}{O OKOMENU { ()O}{OOKOMENU 4. 5. 6. POWER Press the G button and then D / E button to adjust the minute. Press the OK button.
Other functions TV and AV modes Special Language Input { Childolock { Blueoback { Tilt { Degauss { { { Game be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Inputs Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. ()O}{O OKOMENU 1 Press the MENU button and then D / E Special 2. 3. POWER can menu.
Other functions Blue back (option) If you select On ground appears Special 3. 4. 5. on on the Blue back pull-down menu, the blue backthe screen when there is no or poor signal. Press the MENU button and then D / E 1. 2. Special button to select the menu. Press the G button and then D / E button to select Blue back. Press the G button and then D / E button to select On or Off on the Blue back pull-down menu. Press the OK or F button.
Other functions Games Special Language Input { Childolock { Blueoback { Tilt { Degauss { { { Game Game is 2. 3. 4. 1 4 7 Press the MENU button and then D / E Special ()O}{OOKOMENU can MUTE 2 5 3 6 8 9 0 TV/AV can perform this button to select the menu. Press the G button and then D / E button to select Game. Press the G button to enter the game mode. Press the D / E button to select a game and then press the OK button.
PIP Option PIP is operation (option) : an optional function, so that only the set with PIP function operate. can PIP (Picture in Picture) displays a picture within a PIP function is not available in Component mode. picture. On and off Press the PIP button to switch on the sub Press this button again to switch it off. mode selection for sub Input pictures. picture Press the INPUT button to select the mode for the sub input pic- ture.
Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. Teletext is a set free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. 1 2 3 4 5 6 a The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems.
Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3.
Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE 1 2 3 4 5 6 Selects double Press this Press this 7 8 9 0 height text. button to enlarge the top button again to enlarge page. Press this button again half of the page. the bottom half of the to return to the normal display. UPDATE Displays the teletext picture on page.
Connection of external You can connect additional equipment, such as equipment VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. ANT IN Y LL PB PR DVD INPUT (480i) COMPONENT OUT AV VIDEO (L/MONO)AUDIO (R) IN Aerial socket 1. 2. 3. 4. 5. Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR.
Connection of external equipment S-video / Audio in sockets When the S-video socket of the VCR to the S-VIDEO socket of the set, the ANT IN OUT 75Ω connecting VIDEO (S-AV) (option) picture quality will be further improved. (L) -AUDIO (R) - IN VCR 1. Connect the S-video socket of the VCR to the S-VIDEO socket 2. of the set. Connect the audio cable from the VCR to the AUDIO sockets of the set. 3. 4. Select AV3 by pressing the TV/AV button Press the PLAY button on the VCR.
Troubleshooting check list Symptoms No picture, no Sound sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?) TV?) Check aerial Check for local interference Adjust
