Owner's Manual

21.
Remote Control
Lock mode
(Command2-1:9, Command2-2:1)
To lock the front
panel
controls on the
projector
and remote control.
Transmission
Data 00 : Remote Control Lock Off
01 : Remote Control Lock On
Data 00 : Remote Control Lock Off
01 : Remote Control Lock On
[k][9][1][ ][SetID][ ][Data][Cr]
[9][1][ ][SetID][ ][OK][Data][X]
Ack
*
If
you're
not use the remote
control,
set this mode.
19. Volume
Control
(Command2-1:5, Command2-2:0)
To
adjust
volume.
Transmission
Data Min:00~Max:64
*
Refer to 'Real data
mapping
1'.
*
Always
marks data value with Hexadecimal.
That
is,
marks with
two-place
Hexadecimal
while
writing
and read data is also marked with
Hexadecimal value.
Data Min:00~Max:64
[k][5][0][][SetID][ ][Data][Cr]
[5][0][ ][SetID][ ][OK][Data][X]
Ack
20. OSD Lock mode
(Command2-1:9, Command2-2:0)
This function
operates
Local
Keypad
and
Remote control Lock so that
only
Power button
on Local
Keypad
works with "OSD Lock On".
Transmission
Data 00 : OSD Lock Mode Off
01 : OSD Lock Mode On
Data 00 : OSD Lock Mode Off
01 : OSD Lock Mode On
[k][9][0][ ][SetID][ ][Data][Cr]
[9][0][ ][SetID][ ][OK][Data][X]
Ack
18. Volume
Mute
(Command2-1:5, Command2-2:4)
To control volume mute on/off.
Transmission
Data 00 : Volume Mute On
(Volume Off)
01 : Volume Mute Off
(Volume On)
Data 00 : Volume Mute On
(Volume Off)
01 : Volume Mute Off
(Volume On)
[k][5][4][][SetID][ ][Data][Cr]
[5][4][ ][SetID][ ][OK][Data][X]
Ack
62
17. Twin
Picture
Mode
Select
(Command2-1:4, Command2-2:1)
To control the twin
picture.
Transmission
Data 00:FULL 01:TWIN1 02:TWIN2
Data 00:FULL 01:TWIN1 02:TWIN2
[k][4][1][][SetID][ ][Data][Cr]
[4][1][ ][SetID][ ][OK][Data][X]
Ack