Owner's Manual

59
01. Power
(Command2-1:0, Command2-2:0)
To control Power On/Off of the
Projector.
Transmission
Data 00 : Power Off
01 : Power On
[k] [0] [0] [Set ID] [ ] [Data] [Cr]
[k][0][0][][SetID][][FF][Cr]
[0][0][][SetID][ ][OK][Data][X]
[0][0][][SetID][ ][OK][Data][X]
Ack
Ack
Data 00 : Power Off
01 : Power On
To show Power On/Off status.
Transmission
Data 00 : Power Off
01 : Power On
*
In like
manner,
if other functions transmit
'FF' data based on this
format,
Acknowledgement
data feed back
presents
status about each function.
02.
Input
Select
(Command2-1:0, Command2-2:1)
To select
input
source for the Set.
Transmission
Data 00 : A-RGB1 01 : A-RGB2 02 : D-RGB
03 : Video 04 : S-Video 05 :
Component
Data 00 : A-RGB1 01 : A-RGB2 02 : D-RGB
03 : Video 04 : S-Video 05 :
Component
[k][0][1][][SetID][][Data][Cr]
[0][1][][SetID][ ][OK][Data][X]
Ack
03.
Aspect
Ratio
(Command2-1:0, Command2-2:2)
To
adjust
the screen format.
Transmission
Data 00 : Wide
Screen(16:9)
01 : Normal
Screen( 4:3)
02:Zoom1 03: Zoom2
04:Zoom3 05: Zoom4
Data 00 : Wide
Screen(16:9)
01 : Normal
Screen( 4:3)
02:Zoom1 03: Zoom2
04:Zoom3 05: Zoom4
[k][0][2][ ][SetID][ ][Data][Cr]
[0][2][ ][SetID][][OK][Data][X]
Ack
*
Using
the PC
input,
you
select either 16:9 or 4:3 screen
aspect
ratio.
*
Screen size function doesn't work with HD
signal.
*
Zoom1~Zoom4 mode works
only
with Video/S-Video/
Component(480i(576i), 480p) input.
04. Screen
Mute
(Command2-1:0, Command2-2:3)
To select screen mute on/off.
Transmission
Data 01 : Screen Mute On
(Picture Off)
00 : Screen Mute Off
(Picture On)
Data 01 : Screen Mute On
(Picture Off)
00 : Screen Mute Off
(Picture On)
[k][0][3][ ][SetID][ ][Data][Cr]
[0][3][ ][SetID][][OK][Data][X]
Ack
05. Sub
Input
Select
(Command2-1:0, Command2-2:4)
To select
input
source for sub
picture.
Transmission
Data 00 : A-RGB1 01 : A-RGB2 02 : D-RGB
03 : Video 04 : S-Video 05 :
Component
Data 00 : A-RGB1 01 : A-RGB2 02 : D-RGB
03 : Video 04 : S-Video 05 :
Component
[k][0][4][ ][SetID][ ][Data][Cr]
[0][4][ ][SetID][][OK][Data][X]
Ack