Owner's Manual

22
Turning
on the
Projector
Remove the lens cover of the
projector.
2
Connect
power
cord
correctly.
1
Press the POWER button on the remote control or
top cover.(Green operation
indicator flashes
during cooling
of the
lamp.)
It will take about 1 minute to
display
the
picture
after
power
on because the
projector lamp
has to
warm
up.
An
image
will
appear
after the
operation
indicator
light up(Green).
Select the source mode with the
INPUT SELECT
button.
Leave the
projector plugged
in for at least 2 minutes after
switching
off the
projector,
as this
will allow the
lamp cooling
to continue which will
help
to
preserve
the
lamp
life.
3
Adjust
volume level.
If
you press
VOLUME
Γ
button,
sound and volume level number are increased.
If
you press
VOLUME
Φ
button,
sound and volume level number are decreased.
4
24
*
Don't turn main
power
off and don't
unplug
the
power
cord while the ventilation
fan(inlet/outlet)
is
working.
R