Installation

4
CO
2
Sensor Installation Manual
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Do not install the CO2 sensor (or its hard-wired and exten-
sion cables) in a location exposed to open ame or extreme
heat. Do not touch the sensor with wet hands.
There is risk of re, electric shock, physical injury or death.
Do not modify or extend the power supply cord.
There is risk of re, electric shock, physical injury or death.
Only authorized persons should operate the product.
If the sensor is not operated properly, there is a risk of physical injury.
Do not provide power to or operate the sensor if it is ooded
or submerged. Always have the dealer or an authorized tech-
nician to service the sensor.
There is risk of re, electric shock, physical injury or death.
Do not store or use ammable gas or combustibles near the
sensor.
There is risk of re, explosion, and physical injury or death.
Do not the sensor to get wet.
There is risk of unit failure or malfunction.
Only authorized persons should operate the CO2 sensor.
There is risk of unit failure or malfunction.
Do not drop the CO2 sensor.
There is risk of unit failure or malfunction.
OPERATION
DANGER
CAUTION
SAFETY PRECAUTIONS