Quick Setup Guide

17
PC700
3
Secure the PC700 to the set using the four
screws provided.
● RGB, DP(Display Port), LINE-OUT(Audio Out), and LAN cables are not included. You need to
purchase these separately, if needed.
● After cabling is complete, assign the SET ID of the monitor to be connected to PC700.
● To configure the SET ID, please refer to the owner’s manual for your monitor.
Attention
2 Connect PC700 to a monitor with an RGB cable.
1 Connect the appropriate power cables to a monitor and PC700 respectively.
Connecting a Monitor with an RGB Cable
PC700 In/Out Cable Connection