Owner's Manual

Method
This method is used for fine-tuning the color temperature setting. You can control
the color temperature at two points of the bright part and dark part of the video if you
select 2 Points, at each point of 10 levels if you select 10 Points Signal Level(%),
and at each point of 22 levels of the video if you select 22Points Signal Level(%).
Point
Select screen brightness for color temperature adjustment.
If Method is set to 2 Points; use Low to select shadows and High to select
highlights.
If Method is set to 10 Points Signal Level(%); you can select brightness using
numbers indicating 10 levels.
When the Method is set to 22Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
Signal Level(%)
Select screen brightness for color temperature adjustment.
If Method is set to 10 Points Signal Level(%); you can select brightness using
numbers indicating 10 levels.
When the Method is set to 22Points Signal Level(%), you can select the
brightness with the 22 levels of brightness.
Show brightness level at the maximum signal level(%)
Adjust the luminance to the highest IRE (100 points).
Adjust brightness level at the selected signal level(%)
You can adjust the selected brightness by points.
You can do these settings only when the Picture
Select Mode is the Live Theater,
Expert (Bright space, daytime) or the Expert (Dark space, night) and when the
Method is set to 10 Points Signal Level(%) or 22Points Signal Level(%).
Red / Green / Blue
Adjust the color temperature of the selected point.
Adjust the intensity of Red/Green/Blue in the range of -50 to 50.
You can adjust respective values for the brightness selected in Point.
Depending upon the input signal or the selected picture mode, the available options may
differ.
The configurable items differ depending upon model.
57
•
➔
•
•