Owner's Manual

If the Bluetooth device is too far from the TV, or there are obstacles between them, they
may not operate normally.
Depending on the peripherals (wireless router, microwave oven, etc.), communication
failures may occur.
If the device you selected from Registered Devices does not reconnect, Disconnect
and then reconnect the device.
It differs among devices. When trying to connect to a device, refer to the device's User's
Guide for more information.
Camera
You can set access permissions to the camera for each app.
Universal Control Settings
If you set up the universal remote control, you can control peripheral devices
connected to the TV with the Magic Remote instead of their own remote controls.
For more information, see How to Operate TV
Using Universal Remote Control
in User Guide.
TV On With Mobile
If Turn on via Wi-Fi or Turn on via Bluetooth is set to On, you can turn on your TV
using an application that supports TV On With Mobile.
The TV should be connected to a network.
The TV and the device to be used should be connected to the same network.
The Turn on via Wi-Fi feature must be used in an app on a smart device that supports
the feature.
Turn on via Bluetooth is only available on some smartphones.
The TV must be plugged in.
To connect for the first time make sure the device to be used is ready to connect.
Some models may not be supported.
Delete Connection History
You can delete the connection history of the devices connected to the TV on the
wireless network.
Setting HDMI External Input
General Devices HDMI Settings
You can apply settings to ensure a clear picture and easy control for the HDMI
94
•
•
•
•
•
•
•
•
•
•
•
➔
➔
➔