Owner’s Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- Control Panel
- Changing Oven Settings
- Gas Surface Burners
- Oven
- Before Using the Oven
- Oven Vent
- Using Oven Racks
- Instaview
- Bake
- Convection Mode (Lower Oven Only)
- Meat Probe
- Recommended Baking and Roasting Guide
- Proof (Lower Oven Only)
- Warm
- Broil (Upper Oven Only)
- Recommended Broiling Guide
- Frozen Meal (Lower Oven Only)
- Air Sous-Vide (Lower Oven Only)
- Recommended Air Sous-Vide Guide
- Air Fry (Lower Oven Only)
- Recommended Air Frying Guide
- Remote Start
- Using the Sabbath Mode
- SMART FUNCTIONS
- LG ThinQ Application
- Smart DiagnosisTM Feature
- MAINTENANCE
- TROUBLESHOOTING
- LIMITED WARRANTY
77LIMITED WARRANTY
ENGLISH
Oven shows error
code (F9, F19) but
cooktop burners
are working.
The gas pressure regulator valve is closed.
a Lever’s closed position
• Check that the regulator valve is in the open position.
• If the regulator valve is closed, rotate the lever to open the valve.
a Lever’s closed position
c Lever’s open position
Flames too big on
converted cooktop
(NP
~LP)
The installer missed part of the conversion. (Check 3 parts: regulator, cooktop
valve, broil/bake valve.)
a Regulator
b Cooktop valve
c Broil/Bake valve
• Check with installer first.
• Refer to installation manual.
Flame is too small
or too large
1. Variable gas pressure
2. Installer did not check
• Check with installer first.
Problem Possible Cause & Prevention